Trimble Inc. 66400 Manual De Usuario
Juno Series User Guide
57
Connecting to an Office Computer
4
Installing software onto the handheld
Before you begin, refer to the installation instructions provided with the software.
Some software installations are specifically designed to run on a Windows Mobile
powered device. To install software that has a Windows Mobile installation setup:
powered device. To install software that has a Windows Mobile installation setup:
1.
Connect the handheld to a computer (see
).
2.
Copy the installation files to a folder on the handheld.
3.
Browse to the folder on the handheld. Tap and hold the installation setup file
and then select Run.
and then select Run.
4.
If prompted after installation, perform a soft reset of the handheld (see
page 30
).
To install software that is provided on a CD, or as an installation setup that runs on an
office computer:
office computer:
1.
Connect the handheld to a computer (see
).
2.
If the software is provided on a CD, insert the software CD into the office
computer.
computer.
3.
Run the installation setup.
4.
If prompted, select the install option for a Windows Mobile powered device.
Once the software is installed on the computer, it is automatically transferred to
the handheld.
Once the software is installed on the computer, it is automatically transferred to
the handheld.
Note –
If a memory card is inserted in the handheld, the card appears as an installation
location option. Trimble recommends that you install software to the handheld’s storage
memory, not to a memory card. If you install software to a card and then remove the card
from the handheld, the software will not be available for use.
memory, not to a memory card. If you install software to a card and then remove the card
from the handheld, the software will not be available for use.
5.
If prompted after installation, perform a soft reset of the handheld (see
page 30
).