Benq Corporation 57P30 Manual De Usuario
Using the Application Programs
49
SMS account data
• SMS Service centre address: ______________________
• Character set:
7bit
UCS2
• Message stored for:
1 hour
6 hours
1 day
7 days
Maximum
• Connection type:
GPRS preferred
GSM preferred
GPRS only
GSM only
• Delivery
report
•
Use reply path
MMS account data
• MMS Gateway: ______________________
• Messages valid for:
1 hour
6 hours
1 day
7 days
Maximum
•
Transport: WAP HTTP
• Internet account (Only available when HTTP is selected in
Transport): (Select an Internet account for use with MMS
transmission).
transmission).
• WAP account (Only available when WAP is selected in Trans-
port): (Select a WAP account for use with MMS transmission).
Cell Broadcasting Message setting
1. Tap the Enable cell broadcast checkbox on the CBM tab to
enable the reception of Cell Broadcasting messages.
2. Tap New and select a channel from the dialog box that appears,
and then tap OK.
To delete a channel, tap a channel and tap Delete, Yes.
USB Cable
You can use this option to set up the cable connection mode
between the P30 and PC.
between the P30 and PC.
• PC Connect: Select this item before connecting the P30 to your
PC and using the Handset Manager to perform syncrronization
and backup/restore.
and backup/restore.
• Modem: Select this item before connecting the P30 to your PC
and use the P30 as a modem.
Voice Message
This is where you can enter the number for accessing your voice
messages in your voice mail-box. This number is available from
your network service provider.
messages in your voice mail-box. This number is available from
your network service provider.
Enter the number and tap Done. Once entered, you can directly
access your voice mail-box by pressing and holding the
access your voice mail-box by pressing and holding the
key.
WAP Accounts
WAP account settings are essential for using Internet connections
and MMS service via a WAP gateway. You can manually set up
the WAP account, or ask your service provider to send you a mes-
sage that contains the required setup information and creates the
account automatically on your P30.
and MMS service via a WAP gateway. You can manually set up
the WAP account, or ask your service provider to send you a mes-
sage that contains the required setup information and creates the
account automatically on your P30.
To manually set up a WAP account:
1. Tap New on the Basic tab.
Advanced
• Secure
connection
• Outgoing mail port: ______________
•
•
Use MME encoding
• Incoming mail port: ______________
• Secure
• Secure
password
authentication
P30_E.book Page 49 Thursday, April 29, 2004 8:50 AM