Fargo Electronics Inc OMNI5121 Manual De Usuario
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
7
Reviewing the HDP100 Boot up Sequence
Step
Process
1
The Card feed stepper turns ON (to check for a card on the Flipper table).
2
The Lam Headlift turns until the head up position is returned from the Headlift
Sensor).
Sensor).
3
The Film transfer take-up Motor turns ON to take up any slack in the film.
4
The Print Headlift turns until head up position is returned from Headlift Sensor.
5
The Print Ribbon moves forward until it finds the yellow panel, pauses, advances
to magenta, then backs up to yellow (the Ribbon Sensor detects marks on the
ribbon).
to magenta, then backs up to yellow (the Ribbon Sensor detects marks on the
ribbon).
6
The Transfer Ribbon advances forward two panels from supply (advances until
the Print Film Sensor senses 2 marks on the Film).
the Print Film Sensor senses 2 marks on the Film).
7
The Transfer Ribbon advances forward one panel from supply (advances until
the Print Film Sensor senses 1 mark on the Film).
the Print Film Sensor senses 1 mark on the Film).
8
The Transfer Ribbon reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
Film Sensor senses 1 mark on the Film).
9
The Transfer Ribbon reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
Film Sensor senses 1 mark on the Film).