Hughes Network Systems 24HX-001 Manual De Usuario

Follow the steps below to install the antenna mount.

1.

Determine which side of the mast clamp to use:

T0009024

Mast clamp

Use this side against the mast if the
mast outside diameter is

.

Use this side against the mast if the
mast outside diameter is 3.5 inches
(8.9 centimeters) or larger.

2.

One side of the mast clamp has two open–end bolt holes
that allow the long bolts that are attached to the mast
interface to swing in or out. See figure 4-8. At the side of
the mount where the two open–end bolt holes are, swing the
two bolts outward so you can open the mount enough to
place it around the mast.

T0009032

Open-end
bolt hole