Hughes Network Systems 24HX-001 Manual De Usuario
1027145 – 0001 Revision E
4–20 Installing ODUs
Hub installation
To adjust the antenna elevation (upward or downward pointing
direction), you rotate the antenna upward or downward, as
illustrated in figure 4-15, until the elevation is set as desired.
direction), you rotate the antenna upward or downward, as
illustrated in figure 4-15, until the elevation is set as desired.
Antenna
(front)
Side view
0 elevation
°
Downward
elevation
elevation
Upward
elevation
elevation
T0006035
Figure 4-15
Antenna elevation adjustment
(upward or downward adjustment)
Adjust the antenna to the elevation angle specified in the
configuration document as follows:
configuration document as follows:
1.
Rotate the antenna until its elevation angle (angle from
horizontal) is approximately the same as the specified
elevation angle (typically 0
horizontal) is approximately the same as the specified
elevation angle (typically 0
°
or near 0
°
)
.
If the antenna does not rotate freely, loosen each of the
antenna bracket nuts slightly.
antenna bracket nuts slightly.
4.8
Adjusting the
antenna elevation
antenna elevation