Giant Electronics Ltd T5720 Manual De Usuario

checks for activity on each channel, but only for codes 

1

–

38

. Transmissions using 

code 

0

 are ignored.

When the radio detects channel activity, it stops on that channel and displays the 
code in use.
While the radio is scanning through the channels, 

h

 is displayed. When activity on 

a channel is detected, the radio stops scanning and you can hear the transmission. 
The display shows the channel and code on which activity was detected.
To respond to the transmission, press 

M

 within 5 seconds. 

To stop scanning, briefly press and release 

Q

 or  

J

.

Scan Advance
If the radio stops on a channel you don’t want to listen to while it is scanning, briefly 
press 

[

 or  

]

 to resume scanning for the next active channel.

Nuisance Delete
If the radio continuously stops on an undesired channel while it is scanning, press 
and hold 

[

 or  

]

 for at least 3 seconds, then release. This temporarily removes the 

undesired channel from the scan list. To restore the channel, turn the radio off and 
then on.
Note:  You cannot remove your home channel from the scan list. The home channel 

is the channel your radio was set to when you activated scan.

1042b60o.book  Page 22  Monday, October 28, 2002  5:03 PM