Belkin International Inc. F5D6231-4 Manual De Usuario
I
NSTALLATION
G
UIDE
2
Hardware Setup
Indicator LEDs
Front Panel
The front panel of the F5D6231-4 Wireless Gateway provides indicator LEDs for
easy monitoring. The following table defines the function of each LED.
easy monitoring. The following table defines the function of each LED.
Connecting Devices
Rear Panel
1.
Connecting Computers with Wires: Connect computers directly to the
Gateway on ports 1-4 on the rear panel. If you have more than 4 computers to
plug in, connect a hub or a switch to one of these ports and connect additional
computers to that device.
Gateway on ports 1-4 on the rear panel. If you have more than 4 computers to
plug in, connect a hub or a switch to one of these ports and connect additional
computers to that device.
2.
Connecting Wireless Computers: Simply make sure your wireless computers
are within range of the Gateway.
are within range of the Gateway.
3.
Connecting a Cable Modem or DSL Modem: Connect your Cable or DSL
modem to the WAN port on the rear panel.
modem to the WAN port on the rear panel.
4.
Power: Plug the power adapter into the power jack (9 V/1000 mA).
LED
Condition
Status
Ready
(Power)
On Green
Gateway is receiving power.
Connected
(Internet Status)
On Green
Gateway stays on internet connection.
WLAN
(Wireless AP)
On Green
The WAN port has established a valid wireless connection.
WAN
On Green
The WAN port has established a valid network connection.
LAN
On Green
The indicated LAN port has connected at speed of 10 Mbps.
On Amber
The indicated LAN port has connected at speed of 100 Mbps.
Blinking
The indicated LAN port is transmitting or receiving traffic.