Belkin International Inc. F5D6231-4 Manual De Usuario

1.

Click “Start,” then “Run...”

2.

Type “WINIPCFG” and click “OK.” It may take a minute or two for the “IP 
Configuration” window to appear.

3.

From the drop-down menu, select your network card. Click “Release” and then 
“Renew.” Verify that your IP address is now 192.168.2.xxx (2~255), your 
Subnet Mask is 255.255.255.0, and your Default Gateway is 192.168. 2.1. 
These values confirm that your F5D6231-4 Wireless Gateway is 
functioning. 

4.

Click “OK” to close the “IP Configuration” window.

Now that your computer is configured to connect to your F5D6231-4 Wireless 
Gateway, please skip to “Configuring Your Gateway” on page 12.

After you have completed the hardware setup by connecting your devices, configure 
your computer to connect to your F5D6231-4 Wireless Gateway. Many ISPs issue 
these numbers automatically using a networking technology known as Dynamic 
Host Configuration Protocol, or DHCP. Other ISPs will specify your IP address and 
associated numbers, which you must enter manually. This is also known as a static 
IP address. How your ISP assigns your IP address determines how you will 
configure your computer.

Here is what to do:

1.

From the Windows desktop, click the “Start” button. Choose “Settings,” then 
click “Control Panel.”

2.

Double-click the “Network & Dial-Up Connections” icon.

3.

Double-click the icon that corresponds to the connection to your F5D6231-4 
Wireless Gateway.

4.

Click “Properties.” After then, double-click “Internet Protocol (TCP/IP).”

5.

All information you need to record is on the “Internet Protocol (TCP/IP) 
Properties” dialog box. Use the spaces below to record the information.

IP Address

____.____.____.____

Subnet Mask

____.____.____.____

Primary DNS Server

____.____.____.____

Secondary DNS Server

____.____.____.____

Default Gateway

____.____.____.____

Host Name