Belkin International Inc. F5U035 Manual De Usuario
Revision 0.25
- 19 -
Channel Selection
The Belkin(R) dongle will operate in Band Group 1 mode only. The channels
supported within the Band Group1 are listed in the Table 1. If there are multiple
supported within the Band Group1 are listed in the Table 1. If there are multiple
dongles, you may choose to operate the dongles in different channels for
simultaneous operations. The default channel Belkin dongle is programmed to
simultaneous operations. The default channel Belkin dongle is programmed to
operate in channel number 14.
Channel
Number
TFC Code
Band ID
9
1
1 2 3 1 2 3
10
2
1 3 2 1 3 2
11
3
1 1 2 2 3 3
12
4
1 1 3 3 2 2
13
5
1 1 1 1 1 1
14
6
2 2 2 2 2 2
15
7
3 3 3 3 3 3
Table 1 PHY Channel Numbers
Multi-Channel Operations
If there’s a need to have simultaneous UWB connections, you may choose to operate
these systems in different channel numbers without any interference. Before
inserting the Belkin dongles, open the WiMedia Manager and change the channel
inserting the Belkin dongles, open the WiMedia Manager and change the channel
number appropriately.