Belkin International Inc. F5U302DNGL Manual De Usuario
User's Manual Draft 1.3.doc
Page 15 of 24
Pairing and Association/Connection
Once the Hub is powered up and completes its initialization, it is ready for
association. First-time association occurs after physically connecting Hub with the
PC via USB cable. This is also called “pairing” the two entities.
association. First-time association occurs after physically connecting Hub with the
PC via USB cable. This is also called “pairing” the two entities.
After the first-time connection/association, future association is handled
automatically, so that no user intervention is necessary.
automatically, so that no user intervention is necessary.
Automatic Association
After the first manual association, the same Hub is automatically associated to the
same computer whenever the Hub operates within range. To associate to another
Hub, you follow the instructions for “Pairing and Association” above. Multiple Hubs
may be associated with a single host PC.
same computer whenever the Hub operates within range. To associate to another
Hub, you follow the instructions for “Pairing and Association” above. Multiple Hubs
may be associated with a single host PC.
De-Association/ (Pairing)
To remove an association /registration from a Hub:
1. Open “Ultrawideband Control Center”
2. Select “security properties” for the Hub of interest
3. Select “Remove” to remove association from host PC.
2. Select “security properties” for the Hub of interest
3. Select “Remove” to remove association from host PC.
Closing the Ultrawideband Control Center Application
To shut down the UltraWideBand Control Center: