Belkin International Inc. F5U302DNGL Manual De Usuario
User's Manual Draft 1.3.doc
Page 3 of 24
FCC Statement – F5U302-DNGL
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220,
declare under our sole responsibility that the product: F5U302-DNGL to which
this declaration relates:
declare under our sole responsibility that the product: F5U302-DNGL to which
this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Complies with Part 15 section 519(a) of FCC Rules.
Operation of a hand held device is subject to the following
conditions:
(1) A UWB device operating under the provisions of this
section shall transmit only when it is sending information to
an associated receiver. The UWB intentional radiator shall
cease transmission within 10 seconds unless it receives an
acknowledgement from the associated receiver that its
transmission is being received. An acknowledgment of
reception must continue to be received by the UWB
intentional radiator at least every 10 seconds or the UWB
device must cease transmitting.
(2) The use of antennas mounted on outdoor structures, e.g.,
antennas mounted on the outside of a building or on a
telephone pole, or any fixed outdoors infrastructure is
prohibited. Antennas may be mounted only on the hand held
UWB device.
(3) UWB devices operating under the provisions of this
section may operate indoors or outdoors.
Operation of a hand held device is subject to the following
conditions:
(1) A UWB device operating under the provisions of this
section shall transmit only when it is sending information to
an associated receiver. The UWB intentional radiator shall
cease transmission within 10 seconds unless it receives an
acknowledgement from the associated receiver that its
transmission is being received. An acknowledgment of
reception must continue to be received by the UWB
intentional radiator at least every 10 seconds or the UWB
device must cease transmitting.
(2) The use of antennas mounted on outdoor structures, e.g.,
antennas mounted on the outside of a building or on a
telephone pole, or any fixed outdoors infrastructure is
prohibited. Antennas may be mounted only on the hand held
UWB device.
(3) UWB devices operating under the provisions of this
section may operate indoors or outdoors.