Belkin International Inc. F8M010 Manual De Usuario
Introduction
Operating Instructions
Operating Instructions
Congratulations and thank you for purchasing the TuneCast 3 Mobile FM Transmitter
from Belkin. This product is designed to play your portable audio device through your
car, home, or portable stereo. Please review this User Manual carefully so that you can be
sure to get the most from your TuneCast 3, virtually anywhere you go.
Introduction | 01
| 02
Stereo/Mono
Using the TuneCast 3 Mobile FM Transmitter
1. Turn down your car stereo’s volume.
2. Tune your stereo frequency to a channel with a weak broadcast signal. The ideal channel
1. Turn down your car stereo’s volume.
2. Tune your stereo frequency to a channel with a weak broadcast signal. The ideal channel
is one that is not broadcasting a radio program, or is doing so weakly.
3. Connect the TuneCast 3 to your portable audio device.
4. Connect the included Auto Power Cord to your cigarette-lighter outlet in your car and to
4. Connect the included Auto Power Cord to your cigarette-lighter outlet in your car and to
the bottom of your TuneCast 3 for optional powering in the car.
5. Press and hold the ON/OFF button for approximately two seconds. The display’s status
bar will indicate when the device is powered on.
6. Press the ” ” or “ ” button on the TuneCast 3 to match the frequency on the radio
chosen in step 2. Pressing and holding either button will provide faster tuning.
7. Adjust the volume on the audio device to about three-fourths of the maximum. Adjust
the volume of your FM radio to the desired listening level.
ON/OFF
Forward/
Back
3.5mm Cable
Preset 1
Preset 2
Memory
Preset
Frequency
Power Source
Battery or DC Power
Stereo/
Mono