Belkin International Inc. F8T020V2 Manual De Usuario

 

 

The “Connection shortcut…” menu option creates a shortcut to one or more services on a 
remote device, but does not establish a connection. 
A shortcut to each selected service appears on the My Shortcuts tab of the Bluetooth 
Manager. To use the connection, double-tap the shortcut, or tap-and-hold and select 
Connect from the popup menu. 
To create a new shortcut: 

1.  From the Bluetooth Manager’s New menu, select Connection Shortcut…  

(or tap   ) to start the Bluetooth Connection Wizard: 

2.  On the first wizard screen, choose either: 

a)  “Show all services, let me pick later.” This is the default option; when it is 

selected BTW-CE will display all devices in the vicinity on a future wizard 
screen—after a device is chosen from that list, all services provided by that 
device will be displayed, and you will be able to pick one or more services 
for which shortcuts will be created. 
Or 

b)  Tap a specific type of service. When a specific type of service is selected, 

BTW-CE displays only those devices that potentially offer that service. 
When the wizard is complete, only the chosen service on the chosen device 
will have a shortcut placed on the My Shortcuts screen. 

3.  Tap the Next button to display the second wizard screen, and: 

a) Tap   to display the “Select a device:” screen. Tap a device name: BTW-CE 

returns to the second wizard screen and populates the “Select a device:” field 
with the chosen device. 

b)  Tap the Secure Connection option to enable Authentication and Encryption, 

if desired. 
When this option is enabled, the Pass Key Needed screen (similar to the 
screen in Figure 7) appears. Enter the correct code in the Passkey field and 
tap the Next button. A dialog box appears while pairing takes place and the 
services offered by the device are discovered, and then the wizard 
automatically precedes to the last screen.  
Even when this option is NOT enabled, if Authentication is enabled on the 
remote device, a PIN code will be required the first time a connection is 
attempted. 

4.  Tap the Next button to display the last screen, tap the selection box of each 

service for which a shortcut should be created, and then tap the Finish button. A 
shortcut for each selected service is placed on the My Shortcuts screen and given 
a default name. 

If a specific service was chosen in step 1b, the last screen is different; it does not allow 
you to select a service other than the one specified in step 1b. The displayed screen 
(Figure 19) instead provides additional information about the selected service, including: 

1.  The name of the device that will provide the service. 
2.  The name of the service to be provided. 
3.  A “Connection name:” field, which contains the default name for this shortcut; 

the shortcut name can be changed before proceeding. To change the name, 
highlight it, enter the new name, and then tap the Finish button.