Fujitsu MX130 S1 VFY:M1301SX010IN S26361-F2567-L306 09018 Hoja De Datos
Los códigos de productos
VFY:M1301SX010IN S26361-F2567-L306 09018
Data Sheet
Fujitsu PRIMERGY MX130 S1 Server
Page 3 / 6
http://ts.fujitsu.com/Primergy
Technical details
PRIMERGY MX130 S1
Mainboard
Mainboard type
D 2974
Chipset
AMD 785G
Processor quantity and type
1 x AMD Athlon™ II X2 / AMD Sempron™
Processor
AMD Athlon™ II X2 220
(2 Cores, 2.8 GHz, SLC: 1 MB)
AMD Athlon™ II X2 255
(2 Cores, 3.1 GHz, SLC: 2 MB)
AMD Sempron™ 140
(1 Core, 2.7 GHz, SLC: 1 MB)
(2 Cores, 2.8 GHz, SLC: 1 MB)
AMD Athlon™ II X2 255
(2 Cores, 3.1 GHz, SLC: 2 MB)
AMD Sempron™ 140
(1 Core, 2.7 GHz, SLC: 1 MB)
Memory slots
4
Memory slot type
DIMM (DDR3)
Memory capacity (min. - max.)
1 GB - 16 GB
Memory protection
ECC
Memory notes
Mix and match possible, with dual channel operation better performance (2 modules with equal capacity necessary).
Single channel (1 module) configuration possible.
Single channel (1 module) configuration possible.
Memory modules
1 GB (1 module(s) 1 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB ports
12 (2 x front, 6 x back, 4 x internal)
Graphics (15-pin)
1 x VGA (ATI Radeon® HD 4200 (up to 2811MB) on board); via supplied DVI to VGA adapter.
Serial 1 (9-pin)
1 x RS232
Serial connection
1 x 9pin, 16 byte FIFO, 16550 compatible
LAN / Ethernet (RJ-45)
1 x Gbit/s Ethernet
I/O controller on board
Serial ATA total
6
RAID Controller
6 port SATA with RAID 0/1/10 for HDDs
SATA Controller
SATA2
LAN Controller
BCM 57780, 10/100/1000 Mbit/s Ethernet, PXE-Boot by LAN via PXE-Server, Teaming supported
Trusted Platform Module (TPM)
optional TPM 1.2 (onboard; can be disabled)
Fast IDE/Ultra DMA-100
RAID Controller
RAID Controller
6 port SATA with RAID 0/1/10 for HDDs
Slots
PCI-Express 2.0 x4 (mech. x16)
1 x low profile (210mm)
PCI-Express 2.0 x16
1 x low profile (210mm)
PCI slots
2 x (190 mm) low profile
Slot Notes
PCI 32/33 MHz, 3.3V/5V
Drive bays
Hard disk bays
3 x (2x 3.5-inch and 1x 5.25-inch - all non hot-plug SATA; in each of the 2x 3.5” bays, it is possible to fit up to 2x 2.5”
HDDs).
HDDs).
Hard disk bay configuration
Screw-in only. Maximum 2x 3.5” HDDs possible.
Accessible drive bays
1 x 5.25/1.6-inch for backup devices or CD-RW/DVD
Notes accessible drives
Alternatively 1x slimline DVD plus 1x 3.5” hard disk bay (for 2x 2.5” HDDs) OR 1 full-height frame with 2x 2.5” HDDs.