CALAMP WIRELESS NETWORKS INC. BDD4T83-2 Manual De Usuario
120 20170-302
Paragon
PD
Technical Manual
11
3.1.1.2 Exciter module
The Exciter’s front panel controls and indicators
are:
are:
Figure 7 - Exciter module, front panel
•
Carrier Switch - momentarily keys the trans-
mitter ON while pressed (used for test pur-
poses only).
poses only).
•
On LED - is lit when transmitting
•
Line Sensitivity – not used.
•
Supply LED - is lit when DC power is ap-
plied. Fast Flashes when linked with
PGM800Win. Slow Flashes indicates VCO
(synthesizer) out of lock. Unequal Flashes
indicates internal communication error.
PGM800Win. Slow Flashes indicates VCO
(synthesizer) out of lock. Unequal Flashes
indicates internal communication error.
•
Microphone Socket – not used.
3.1.1.3 Power Amp module
The Power Amp front panel and indicators are:
Figure 8 - Power Amp module, front panel
•
Supply LED - is lit when DC power is ap-
plied.
•
Low Forward Power LED - is lit when for-
ward power is below the level set, normally
80% of nominal forward power.
80% of nominal forward power.
•
High Reverse Power LED - is lit when high
reverse power is detected (e.g. VSWR= 3:1).
•
Power - sets the PA output power:
-
VHF & UHF models: 20 - 100 Watts
-
800 model: 20-70 Watts
Carrier
Switch
On
LED
Supply
LED
Line
Sensitivity
Microphone
Socket
®
Exciter
Car rier
On
Line
Sensitivity
Supply
Microphone
®
Power Amplifier
Low Forward Power
Supply
High Rev erse Power
Power
Supply
LED
Low Forward
Power LED
High Reverse
Power LED
Power
Adjustment