CALAMP WIRELESS NETWORKS INC. BDD4T85-2 Manual De Usuario
120 20190-001
Paragon-III Technical Manual
38
6. Specifications
GENERAL
UHF
800
Frequency
400 - 440 MHz
1
440 - 480 MHz
480 - 520 MHz
480 - 520 MHz
800 - 870 MHz
RF/Modem Assembly Size
19.0” W x 17.5.0” H x 12.5” D + 2.0” connector allowance
Frequency Stability
1.0 ppm (-20 to +60
º
C)
Supply Voltage
13.8 VDC nominal (negative ground), 10.8 - 16 VDC
or
120 VAC
Circuit protection (radio backplane)
Main fuse (F1): Blade fuse (Maxi-Fuse) 10A :
Power amp. fuse (F2 & F3): Blade fuses (Maxi-Fuse) 2 x 15A (30A total)
Crowbar diodes for reverse polarity protection
RX Current Consumption @ 13.8
VDC
1.5A max. (Two receivers with speaker monitoring)
TX Current Consumption @ 13.8 VDC
24A (22A DC typical @
450MHz for 100W)
28A (23A DC typical @ 850MHz for
70W)
Base Station Power Consumption
@ 120 VAC
6A max.
Channel spacing
25 kHz and 12.5 kHz
Operating Temperature Range
-30°C to +60°C
(deleted power supply, catalog number with 0 in second to last digit)
-10°C to +60°C
(with standard Dual Power Supply assy., catalog number with 2 in second to last digit)
RECEIVER
Selectivity @ 25 kHz
@ 12.5 kHz
87 dB min, 90 dB (Typical)
83 dB min, 85 dB (Typical)
83 dB min, 85 dB (Typical)
85 dB min, 88 dB (Typical)
79 dB min, 80 dB (Typical)
79 dB min, 80 dB (Typical)
Sensitivity @ 12 dB SINAD
-116 dBm*
Spurious Response Rejection
100 dB (Typical)
Intermodulation Rejection
- EIA (25 kHz)
- EIA 300-096 (12.5 kHz)
85 dB (Typical)
80 dB (Typical)
80 dB (Typical)
75 dB (Typical)
Hum and Noise
- EIA (25 kHz)
- ETS 300-096 (12.5 kHz)
55 dB*
50 dB*
47 dB*
45 dB*
* Psophometrically weighted (De-emphasis response)
TRANSMITTER
Rated Continuous RF Power
100W
70W
Range of Adjustment
20 – 100 W
20 – 70 W
Spurious Emissions: - transmit
- standby
-36 dBm to 1GHz, -30 dBm to 4 GHz (to 3.2GHz for 800 model)
-57 dBm to 1GHz, -47 dBm to 4 GHz ((to 3.2GHz for 800 model))
VSWR Stability
5:1 mismatch
Transmitter Sideband Noise
@ +/-25 kHz
@ +/- 1 MHz
-95 dBc
-105 dBc
-88 dBc
-100 dBc
1
WARNING: The frequency band 406 to 406.1 MHz is reserved for use by distress beacons and should not be programmed into
the unit.