CALAMP WIRELESS NETWORKS INC. BDP3-CRE700 Manual De Usuario

120 20194-102

Paragon3 – 700/800MHz User Manual

Figure 20 - Web User Interface

4.6.1 Apply, Cancel, Save Config, and Reset Unit Buttons & Help Icon

Several submenus have “Apply” and “Cancel” buttons.

The navigation area has “Save Config”, “Reset Unit” buttons and a Help icon.

If you “Apply” changes to any parameters marked

you will need to do a “Save Config” and a

“Reset Unit”.

Make an entry into a dialog box. When satisfied, click on Apply to temporarily apply the value(s) entered
to the relevant parameter(s). If not satisfied, click on Cancel button to restore to the value(s) present be-
fore a change was made.

Note: Cancel command only affects the dialog boxes or radio buttons in the opened window.

If needed, go to other submenu(s) and make more entries. Click Apply before leaving each window.
When finished, click the Save Config button to make all changed entries permanent.
Notes:

Failure to use the “Apply” command button before leaving a web page will result in the loss of tem-
porarily entered selections, addresses, and values.

Failure to use the “Save Config” command button before doing a Reset Unit will result in the loss of
temporarily entered parameters.

If there are changes to be saved, saving occurs automatically.

• Click on Save Config button:
• If there are no changes to be saved, a window prompts user to confirm saving.

Click on “Reset Unit” button:
• If there are changes to be saved, a window prompts user to confirm resetting.
• If there are no changes to be saved, resetting occurs automatically.

A “Station Reset” 20-second timer counts down while the status reports: “Working…”

When done, the status reports: “Ready”.