CALAMP WIRELESS NETWORKS INC. BDP3-CRE700 Manual De Usuario

Descargar
Página de 72
 
 
120 20194-102 
 
Paragon3 – 700/800MHz User Manual
 
34
4.7.4  Security 
4.7.4.1 Security 
► Password and Encryption Control 
The Setup web pages, the CLI (command line interface) and the FTP server all require a password to pre-
vent unauthorized users from changing a unit’s configuration. At the time of manufacture, the password is 
set to “ADMINISTRATOR” but Dataradio strongly suggests that the password be changed as units are 
installed. 
 
Figure 33 - Security – Password and Encryption 
Item 
Description 
User ID 
Enter a string of any letters or numbers of at least 1 and not exceeding 15 characters 
The User Name entry is currently not an access-limiting factor. It only serves to identify 
the person gaining access. User Name may be required by future versions. 
Old Password 
For an initial installation, enter the default Password ADMINISTRATOR (all upper case 
letters)
. For subsequent access, use the Password that you will have configured. 
New Password 
Enter a string of any letters or numbers of at least 8 and not exceeding 15 characters 
CAUTION: Do not lose the new password or you will not be able to gain access to the unit; 
you will need to contact Dataradio for support as detailed in section 1.3 earlier. 
New Password 
(confirm) 
Re-enter the new password string   
Encryption 
Disabled, Enabled (Default) 
Encryption Pass 
Phrase 
String of characters used to create a 128-bit AES encryption key. The Pass Phrase can be 
up to 160 characters long. Using a length of at least 128 characters should provide an 
adequate security level for most users. 
A good pass phrase mixes alphabetic and numeric characters, and avoids simple prose 
and simple names.  
Encryption Key 
All units in a network must have the same key.  
READ ONLY - Displayed in pairs separated with spaces