CALAMP WIRELESS NETWORKS INC. MCUA5R Manual De Usuario

This document provides the information re-
quired for the installation, operation and main-
tenance of the Dataradio Integra-TR radio-
modem.

This manual is intended for use by system de-
signers, installers and maintenance technicians

 

Integra-TR is a high-speed transparent radio-
modem, FCC refarmed compliant, designed
specifically to fit the needs of SCADA,
telemetry and control applications. Integra-TR
provides the communication links among data
equipment for installations where wired com-
munication is impractical.

 

Integra-TR will work with most makes and
models of RTU, PLC and with their protocols
(usually polling). Configuration settings allow
tailoring for a variety of applications.

 

Integra-T supports:

1.  Point to point Master–Slave or Peer to Peer

configurations in simplex or half-duplex
modes.

2.  Point to multipoint Master–Slave configur-

ation in simplex or half-duplex modes.

 

Settings and connections for these configura-
tions are given later in this manual.

 

Integra-TR has the following characteristics:

•

  Selectable network speeds of 4800, 9600 for

half channel units and 4800, 9600 and
19.200 b/s for full channel units.

•

  Backward compatible with the Integra-T for

bit rate of 4800 and 9600 b/s (full channel
units only)

•

  One COM port for connection to DTE.

Speeds 300 - 19200 bauds.

•

  One Setup port, for configuration and

diagnostics.

•

  Built-in 5-watt transceiver, operating in the

VHF, UHF or 900 MHz communications
bands. Half-duplex or simplex operation.

•

  Fully transparent operation with error-free

data delivery.

•

  Allows transmission of “break” characters.

•

  DOX (Data Operated Transmit) or RTS

mode.

•

  Stations may be set as “master” or “remote”

to prevent remote stations from hearing each
other.

•

  Full local and remote diagnostics

•

  Two 8-bit analog inputs (0 - 10V).

•

  Low power consumption modes: “sleep”

and “suspend” modes (nominal 7mA).

•

  “12 VDC, negative ground”, device.

Accessory

DR Part #

Local RSS & RDS software kit
(diskette and setup/data cable)

085 03281-0xx

Technical manual

120 40101-xxx

SMA Male – BNC Female
adapter

685 00832 –000

Cooling fan  –  factory option
(for high duty-cycle transmit
applications)

Catalog number /F
suffix.

 
 

For continuous-transmit applications, the “TX
Timeout” timer must be turned off (set to “dis-
able”) via the Radio Service Software (RSS).

 

Operating characteristics of Integra-TR are con-
figured by means of Integra-TR’s Radio Service
Software (RSS) available from your sales repre-
sentative. Also available is Integra-T’s Radio
Diagnostic Software (RDS) which permits both
local and remote diagnostics. Remote Radio
Service Software (RRSS) to allow remote pro-
gramming is a future expansion. The RSS, RDS
and RRSS (future option) programs are MSDOS
based and will run on any 486 or higher PC (2
Megabytes memory required).