Crestron Electronics Inc CEN-RFGW-EX Manual De Usuario

ETHERNET

PC RUNNING

CRESTRON TOOLBOX

CEN-RFGW-EX

 

Crestron CEN-RFGW-EX 

infiNET EX™ Gateway

•  15 

Crestron recommends using the latest programming software and that 
each device contains the latest firmware to take advantage of the most 
recently released features. However, before attempting to upload or 
upgrade it is necessary to establish communication. Once communication 
has been established, files (for example, programs or firmware) can be 
transferred to the control system (and/or device). Finally, program checks 
can be performed (such as changing the device ID or creating an IP table) 
to ensure proper functioning. 

Use Crestron Toolbox for communicating with the CEN-RFGW-EX; 
refer to the Crestron Toolbox help file for details. 

•  Enter the IP address, IP mask, and default router of the  

CEN-RFGW-EX via the Crestron Toolbox (Functions | Ethernet 
Addressing); otherwise, leave DHCP enabled. (The unit ships with 
DHCP enabled.) 

•  Confirm Ethernet connections between CEN-RFGW-EX and PC. 

If connecting through a hub or router, use CAT5 straight through 
cables with 8-pin RJ-45 connectors. Alternatively, use a CAT5 
crossover cable to connect the two LAN ports directly without 
using a hub or router. 

•  Use the Address Book in Crestron Toolbox to create an entry for 

the CEN-RFGW-EX with the CEN-RFGW-EX’s TCP/IP 
communication parameters. 

•  Display the “System Info” window (click the 

 icon) and select 

the CEN-RFGW-EX entry.