Crestron Electronics Inc ST-1550C Manual De Usuario
Crestron ST-1550 & ST-1550C SmarTouch STS Touchpanels
Operations Guide - DOC. 5803
SmarTouch STS: Touchpanels
••
11
When the ST-1550C is dropped onto the CNRFGWA, the RF ID default address (10)
is automatically assigned. Verify or reassign in the Detail System View, shown after
this paragraph. Notice that unused slots are hidden.
is automatically assigned. Verify or reassign in the Detail System View, shown after
this paragraph. Notice that unused slots are hidden.
Detail System View of the ST-1550C RFID Assignment in SIMPL Windows’ Configuration
Manager
Manager
Programming Manager
Use the Programming Manager workspace (Project | Program System) in SIMPL
Windows to select symbols and assign their respective signals. For this example, the
touchpanel symbol was added automatically when the device was added to the
system in the Configuration Manager workspace. Expand the Network Modules
folder and double click on the ST-1550C for a detail view (alternatively CTRL+D or
drag and drop into Detail View). Assign signals as shown after this paragraph.
Windows to select symbols and assign their respective signals. For this example, the
touchpanel symbol was added automatically when the device was added to the
system in the Configuration Manager workspace. Expand the Network Modules
folder and double click on the ST-1550C for a detail view (alternatively CTRL+D or
drag and drop into Detail View). Assign signals as shown after this paragraph.
Detail View of the ST-1550C in SIMPL Windows’ Programming Manager
Expand the Central Control Modules folder. Double click on the Slot-07 icon for a
detailed view of the built-in relay (alternatively CTRL+D or drag and drop into
Detail View). Assign signals as shown after this paragtraph.
detailed view of the built-in relay (alternatively CTRL+D or drag and drop into
Detail View). Assign signals as shown after this paragtraph.
Detail View of the CNMSX-PRO Built-In Relay in SIMPL Windows’ Programming
Manager
Manager
All logic symbols necessary for the SIMPL Windows program must be added from
the Symbol Library in the Programming Manager workspace. In this example, drag
and drop one Interlock symbol from the Memory folder into the Logic folder in
Program View. Expand the Logic folder to display the Interlock symbol integrated
the Symbol Library in the Programming Manager workspace. In this example, drag
and drop one Interlock symbol from the Memory folder into the Logic folder in
Program View. Expand the Logic folder to display the Interlock symbol integrated