Crestron Electronics Inc WPR-48 Manual De Usuario
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
WARNING: The WPR-48 Waterproof Wireless Handheld Remote has been tested
and found to be waterproof when submerged to a maximum depth of 1 meter, and for
a maximum duration of 30 minutes, per IEC 60529 IPX7 standards. Exceeding these
limits may result in damage to the equipment, possible personal injury, and void the
product warranty.
and found to be waterproof when submerged to a maximum depth of 1 meter, and for
a maximum duration of 30 minutes, per IEC 60529 IPX7 standards. Exceeding these
limits may result in damage to the equipment, possible personal injury, and void the
product warranty.
WARNING: The WPR-48 is shipped from the factory partially assembled. That is,
the eight screws that secure the rear cover to the button faceplate are not fully
tightened, to simplify the process of installing button labels, as described in this
Operations Guide. As such, the unit is not waterproof; exposing it to water may result
in damage to the equipment, possible personal injury, and void the product warranty.
the eight screws that secure the rear cover to the button faceplate are not fully
tightened, to simplify the process of installing button labels, as described in this
Operations Guide. As such, the unit is not waterproof; exposing it to water may result
in damage to the equipment, possible personal injury, and void the product warranty.
WARNING: After installing button labels, as described in this Operations Guide,
tighten all eight screws that secure the rear cover to the button faceplate evenly just
until the gasket is no longer visible between the button faceplate and the rear cover
(from 1.5 to 2 in/lbs torque, maximum). Do not overtighten the screws. To do so
may damage the gasket such that the unit is no longer waterproof. Exposing
such a unit to water may result in damage to the equipment, possible personal injury,
and void the product warranty.
tighten all eight screws that secure the rear cover to the button faceplate evenly just
until the gasket is no longer visible between the button faceplate and the rear cover
(from 1.5 to 2 in/lbs torque, maximum). Do not overtighten the screws. To do so
may damage the gasket such that the unit is no longer waterproof. Exposing
such a unit to water may result in damage to the equipment, possible personal injury,
and void the product warranty.
WARNING: The lanyard, supplied with the lanyard foot, poses a possible
strangulation hazard. Crestron does not recommend placing the lanyard around the
neck as a means of carrying the WPR-48. Do not leave the lanyard, or the WPR-48
with lanyard foot and lanyard attached, unattended in any area where children or
pets may be present.
strangulation hazard. Crestron does not recommend placing the lanyard around the
neck as a means of carrying the WPR-48. Do not leave the lanyard, or the WPR-48
with lanyard foot and lanyard attached, unattended in any area where children or
pets may be present.
WARNING: This product contains small parts and is not intended for children. This
product is intended for adult use only.
product is intended for adult use only.
All brand names, product names, and trademarks are the property of their respective owners.
©2004 Crestron Electronics, Inc.