Boston Scientific Corporation CRM320014 Manual De Usuario

EMBLEM™ S-ICD PROGRAMMER: OPERATIOn

Export using a microSD™ card

Data may also be exported using a microSD™ card. For security reasons, the programmer will

only export data to Model 3205 microSD cards. Using any other microSD card will cause an error

message (invalid card) to appear.

1. Navigate to the programmer start-up screen.
2. Insert the card into the microSD slot according to the instructions presented in

Appendix A: Insertion and Removal of the microSD™ Card . The instructions are also

provided with Model 3205 microSD Card. A Copy Data screen will appear when the

microSD card has been properly inserted and recognized.

Note: An invalid card error message will appear if any card other than a Model 3205

card is inserted. The message may also appear if the programmer does not

recognize the Model 3205 card after insertion. Should this occur, remove the

card and select the OK button on the error screen. Wait for the programmer

start-up screen to reappear and then reinsert the card.

3. Select the Copy Data button on this screen and the next screen.
4. A confirmation screen is presented when the copy process is complete. Selecting the OK

button will return the programmer to its start-up screen.

5. Remove the microSD card according to the instruction sheet (Appendix A).

Note: Navigating away from and returning to the start-up screen with the microSD card still

inserted will cause the export process to begin again.

S-ECG Features

The programmer provides the capability to view, adjust and capture the streaming S-ECG from the

pulse generator.

S-ECG Rhythm Strip Markers

The system provides annotations to identify specific events on the S-ECG. These markers are shown

in the S-ECG Markers on Programmer Display Screens and Printed Reports table (Table 2) and an

example is shown in Figure 43.