USA Alinco Branch DR-135T Manual De Usuario
31
7. Advanced Operations
[Operation 2]
Choose this operation when a delay period is desired.
1.
Enter the Parameter setting mode as described previously and select SCR-DLY.
Follow the previous instruction to set.
Follow the previous instruction to set.
2.
Turn off the unit. Display will disappear but the LCD illumination stays on. After 20
seconds TX LED lights up, illumination dims, and alarm functions. The system won’t
work during the 20 second “DELAY” period.
seconds TX LED lights up, illumination dims, and alarm functions. The system won’t
work during the 20 second “DELAY” period.
3.
The alarm sounds under the same condition as described previously. There is a 20
second delay until the alarm sounds. During the 20 second period, only the display
illumination is lit. Turn ON the unit during “DELAY” period to cancel the alarm
function.
second delay until the alarm sounds. During the 20 second period, only the display
illumination is lit. Turn ON the unit during “DELAY” period to cancel the alarm
function.
Please set the parameter at SCR-OF during normal operation.
NOTE:
The alarm feature on DR-135TA version functions in a slightly different manner.
1. When the alarm starts, the unit alternates between transmit and receive on
ch.99 every 5 seconds for 1 minute, then sounds the audio alarm only for 10
minutes.
2. Setting and operation of the function are the same as other versions.
This feature allows you to monitor and to control the alarm from a remote place by
using ch.99 on memory mode.