First International Computer Inc AT2WG Manual De Usuario

 

7

107 

 

Your computer comes with standard 256 MB, 512MB or 1024MB of 
synchronous DDR SDRAM. You can increase system memory to a maximum 
of 2048 MB in the system, by installing two small outline double inline memory 
modules (SO-DIMMs) with installed base memory in the system. 

The 256MB, 512MB and 1024MB memory modules are available: 

To install the memory module: 

1.  Make sure the system is powered off, the battery also is removed and that 

no peripheral devices are attached. 

2.  Turn the computer upside-down and locate the screw that secures the 

DIMM door at the underside of the notebook. 

 

3.  Remove the screw and open the DIMM cover by your finger.  

4.  Locate the memory module into the empty memory module sockets. 

(Your system comes with one memory module already installed in the 
socket.)