First International Computer Inc AT2WG Manual De Usuario

Descargar
Página de 124
N
otebook User Guide
 
36 
 
Replacing the Battery Pack 
When your notebook estimates that the battery only has enough charge to 
continue for a few minutes, it will alert you with a battery low warning beep. If 
you are consuming a lot of power by using the audio system, the PCMCIA 
slots, the hard disk drives, and Combo drive, your notebook might run out of 
charge much sooner than you expect. You should always respond to the 
battery low indication by connecting to AC power or turning off your 
notebook, or suspending your notebook to disk. If you do not do so, the 
notebook will automatically suspend to disk and turn off. The contents of the 
memory will store in the hard disk drive. You will be unable to restart the 
notebook until you have connected to the AC adapter or installed a charged 
battery. To replace the battery pack, refer to the previous sections on 
"Installing the Battery Pack" and "Removing the Battery Pack." 
 
For Window XP, the suspend mode (Hibernate or Standby) can be chosen 
at Power Options of Windows's Control Panel) 
 
Be sure to save your data before replacing the battery pack or connecting 
the AC adapter. Failure to do so can result in data loss. 
E
XTENDING 
B
ATTERY 
L
IFE
 
It is important to be aware of the simple things for extending the life of the 
system main battery while you are on the road. You should find a working 
place where the external lighting is not too bright and turn down the screen 
brightness. Also, you can choose the available mode on the Power 
Management item of the Control Panel in Windows.