First International Computer Inc AT2WG Manual De Usuario

Descargar
Página de 124
N
otebook User Guide
 
60 
 
3.6  Working with the Built-in HDD 
Your notebook computer is equipped with a built-in large capacity 2.5 inch 
IDE hard disk drive where you store or install your computer operating system 
and all application software programs. You need to format the hard disk 
before using. The internal hard disk is normally assigned as Drive C after 
formatting. Sometimes divided into two partitions, adding a Drive D. Since 
your computer supports different hard disk capacities (up to 60 GB), you also 
need to setup the disk type first on your computer’s BIOS SETUP program 
before formatting the disk drive. Your computer supports Auto-detect hard 
disk type, so you do not need to set it manually. Your dealer should already 
have done all of this for you. You can refer to Chapter 6 on how to run the 
BIOS SETUP program.  
You can increase the system’s storage capacity by replacing the standard hard 
disk drive with a drive of greater storage capacity. 
 
If you wish to replace your hard disk, contact your local dealer for more 
information about this dealer-installable device. 
 
Always turn off your computer first before removing the hard disk drive. 
Failure to do so will damage the computer and the hard disk. Avoid jarring 
or moving the computer while the hard disk is still being accessed. 
3.7  How to Access the Optical Drive 
Your system ships with an optical disk drive installed on the right side of your 
computer. You would normally use the drive for installing operating system 
and software application programs.  
To insert and remove a disc on the drive: