VTech Telecommunications Ltd 80-9395-01 Manual De Usuario

Press 

PATROL key to display images from 

different baby units in every 7 seconds.
Press 

SPLIT key again to return to  

SINGLE-CAM mode. 

NOTE

NOTES

Monitoring mode is not applicable when there is only 

one baby unit. 
The parent unit is muted while in 

mode.

You can zoom in or out while viewing image 
from baby unit in 

SINGLE-CAM mode.

Press   to zoom in. 
Press and hold  ,  ,   or   to move the 

zoomed image upward, downward, leftward 

or rightward correspondingly. 
Press   again to zoom out.

You can use the 

TALK function of the parent 

unit to comfort your baby in 

SINGLE-CAM 

mode

.

Press and hold 

TALK on the parent unit. The

The 

TALK light turns on.
Speak towards the microphone on the parent 

unit. Your voice is broadcast to the baby unit. 
Release the 

TALK key to stop the broadcast. 

The 

TALK light goes off.

Low battery tone
You can set the parent unit to beep when the 
parent unit operates in low battery condition.

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

ALERT TONE, then 

press 

SELECT.

Press   or   choose 

Low Battery Tone, 

then press 

SELECT.

Press   or   to choose 

On or Off, then press 

to confirm your selection. 

No link alert
You can set the parent unit to beeps when the 
link between the parent unit and the baby unit is 
lost. 

•

•

•

•

•
•

•

1.

2.

3.

1.

2.

3.

4.

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

ALERT TONE, then 

press 

SELECT.

Press   or   to choose 

No Link Alert, then 

press 

SELECT.

Press   or   to choose 

On or Off, then press 

to confirm your selection. 

Sound alert
You can turn on the sound alert feature so that, 
while in 

SPLIT-VIEW mode, the parent unit 

beeps and displays

 Sound detected at CAM # 

whenever the baby unit detects sounds.

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

ALERT TONE, then 

press 

SELECT to select.

Press   or   to choose 

Sound Alert, then 

press 

SELECT.

Press   or   to choose 

On or Off, then press 

to confirm your selection.

To monitor the temperature of your baby’s room, 
you can turn on the temperature alert feature 
on the parent unit. It beeps whenever the 
temperature detected by the baby unit falls out 
of the desired temperature range.

Minimum temperature
You can set the desired minimum room 
temperature of the room temperature alert 
range. The minimum temperature can be set 
between 

C) and 69 

C). 

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

TEMPERATURE, 

then press 

SELECT.

Press   or   to choose 

Minimum, then 

press 

SELECT. 

If you have more than one baby unit, 

the system prompts you to choose the 

desired baby unit or all baby units, press 

 or   to choose 

All CAM or CAM #, 

then press 

SELECT.

Press   or   to choose the desired 

temperature, then press 

to confirm 

your selection. 

1.

2.

3.

4.

1.

2.

3.

4.

1.

2.

3.

•

4.

Maximum temperature
You can set the desired maximum room 
temperature of the temperature alert range. The 
maximum temperature can be set between  
70 

C) and 86 

C).

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

TEMPERATURE, 

then press 

SELECT.

Press   or   to choose 

Maximum, then 

press 

SELECT. 

If you have more than one baby unit, 

the system prompts you to choose the 

desired baby unit or all baby units, press 

 or   to choose 

All CAM or CAM #, 

then press 

SELECT.

Press   or   to choose the desired 

temperature, then press 

to confirm 

your selection.

Temperature alert
You can set the parent unit to beep when the 
temperature is out of the preset temperature 
range. 

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

TEMPERATURE, 

then press 

SELECT.

Press   or   to choose 

Alert, then press 

SELECT.

If you have more than one baby unit, 

the system prompts you to choose the 

desired baby unit or all baby units, press 

 or   to choose 

All CAM or CAM #, 

then press 

SELECT.

Press   or   to choose 

On or Off, then press 

SELECT to confirm your selection.

Temperature format
You can choose to display the temperature in 
Fahrenheit (

o

F) or Celcius (

o

C).

Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

TEMPERATURE, 

then press 

SELECT.

Press   or   to choose 

Format, then press 

SELECT.
Press   or   to choose 

Fahrenheit or 

Celsius, then press SELECT to confirm your 

selection.

1.

2.

3.

•

4.

1.

2.

3.

•

4.

1.

2.

3.

4.

You can turn on the vibration feature so that the 

parent unit vibrates when

the baby unit detects sounds in 

SPLIT-VIEW 

mode; 

the link between the parent unit and the baby 

unit is lost; or 
the temperature detected by the baby unit 
falls out of the preset temperature range.
Press 

MENU when the parent unit is not in 

use.
Press   or   to choose 

VIBRATION, then 

press 

SELECT.

Press   or   to choose 

On if speaker is off, 

Always on or Off.

On if speaker is off - The parent unit 

vibrates only when the speaker of the 

parent unit is turned off.
Always on - The parent unit vibrates 

regardless of the speaker volume setting.
Off - The parent unit will not vibrate at all 

instance.

Press 

to confirm your selection.

NOTE

If you set the sensitivity level to 

Level 5, the baby unit 

will be very sensitive and detect any sounds including 

background noises. These background noises may 

disrupt the silence and prevent the vibration feature to 

work properly.

You can rename each baby unit. Once the baby 
unit is renamed, its new name together with the 
baby unit number will appear in the sub-menu of 
below options:

Sensitivity
Temperature
Rename
Pair/unpair

Press 

MENU when the parent unit is not in use.

Press   or   to choose 

RENAME, then press 

SELECT.
Press   or   to choose the desired baby unit, 

then press 

SELECT.

Press   or   to choose the desired name for 

the baby unit, then press 

SELECT to confirm 

your selection.

•

•

•

1.

2.

3.

4.

•
•
•
•

1.
2.

3.

4.

The baby unit has infrared LEDs that allow 
you to see your baby clearly at night or in a 
dark room. When the baby unit detects low 
light levels, the infrared LEDs are switched on 
automatically.

NOTE

When the infrared LEDs are on, the image is in 

black and white. This is normal due to external light 

sources.

TIP

Depending on the surroundings and other interfering 

factors, like lightings, objects, colors and backgrounds, 

the display resolution may vary. Adjust the baby unit’s 

angle or place the baby unit at a higher level to prevent 

glare and blurry display.

The baby units and parent unit provided are 
already paired. You can add or replace any baby 
units (

VM305 purchased separately) to your 

video and audio monitor system. You can pair a 
maximum of four baby units to your parent unit.

For more details, refer to the user’s manual that 
comes with your 

VM305 new baby unit.

To keep this product working well and looking good, 

follow these guidelines:

Avoid putting it near heating appliances and devices 

that generate electrical noise (for example, motors or 

fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft cloth.
DO NOT immerse the parent unit and the baby unit 

in water and do not clean them under the tap.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit and parent unit are dry 

before you connect them to the mains again.

When you are not going to use the baby monitor for 

some time, remove the rechargeable battery from the 

parent unit. Store the parent unit, the baby unit and the 

adapters in a cool and dry place.

•

•
•
•
•

•
•

Below are the questions most frequently asked about 

the baby monitor. If you cannot find the answer to your 

question, visit our website at 

www.vtechphones.com, 

or contact 

1 (800) 595-9511 for customer service.

Why does the 

baby monitor 

not respond 

normally?

Try the following (in the order listed) 

for common sure:
1. Disconnect the power to the baby 

units and the parent unit.

2. Remove the batteries in the 

parent unit. Then install the 

batteries again.

3. Wait a few minutes before 

connecting power back to the 

baby units and the parent unit.

4. Turn on the baby units and the 

parent unit.

5. Wait for the parent unit to 

synchronize with the baby units. 

Allow up to one minute for this to 

take place.

Why don’t 

the power-on 

light of the 

baby unit and 

parent unit 

go on when I 

switch on the 

units?

Perhaps the rechargeable battery 

of the parent unit is empty and the 

parent unit is not connected to the 

mains. Insert the appliance plug 

into the parent unit and put the 

adapter in a wall socket. Then press 

 to switch on the parent unit and 

to establish connection with the 

baby unit.

Perhaps the baby unit is not 

connected to the mains. Connect 

the baby unit to the mains. Then set 

ON/OFF switch to ON to switch on 

the baby unit and to establish  

connection with the parent unit.

Why is my 

screen in 

black and 

white?

The screen is in black and white 

during nighttime or in a dark room. 

This is normal due to external light 

sources.

Why do I get 

glare or blurry 

display on my 

screen when 

viewing my 

baby at night?

During nighttime or in a dark 

room, the surroundings and other 

interfering factors, like lightings, 

objects, colors and backgrounds 

may affect the image quality on 

your parent unit screen. Adjust the 

baby unit’s angle or place the baby 

unit at a higher level to prevent 

glare and blurry display.

Why does the 

baby monitor 

produce a  

high-pitched 

noise?

The units may be too close to each 

other. Make sure the parent unit 

and the baby unit at least  

1 meter/3 feet away from each 

other.

The 

ON/OFF 

light on the 

baby unit 

flashes and 

the parent unit 

displays  .

The baby unit is unpaired from the 

parent unit.
Make sure both parent unit and 

baby unit are on before pairing.

Press 

MENU when the parent 

unit is not in use.
Press   or   to choose 

PAIR/UNPAIR CAM, then press 

SELECT.
Press   or   to choose 

CAM, then press SELECT.
Press   or   to choose an 

empty baby unit slot, then 

press 

SELECT. The parent unit 

screen displays 

indicator flashes..
Immediately press and hold 

PAIR on the bottom of the baby 

unit. The LED light flashes 

quickly.

When pairing is successful, the 

screen displays the view of newly 

paired baby unit in 

SINGLE-CAM 

mode. The LED light on the new 

baby unit remains on.

If pairing fails, the screen 

displays 

Pairing failed. Try the 

pairing process again.
Only one baby unit can be paired 

at a time.

1.

2.

3.

4.

5.

•

•

Why does 

the parent 

unit react too 

quickly to 

other sounds?

The baby unit also picks up other 

sounds than those of your baby. 

Adjust the sensitivity level to a 

lower level or adjust the speaker 

volume on the parent unit.

Why don’t I 

hear a sound/

Why can’t I 

hear my baby 

cry?

The parent unit speaker volume 

may be too low or off. Press 

VOL+ 

to increase the volume. 

You may have set a low sound 

sensitivity level. See 

unit to change the setting.

Why does the 

parent unit 

beep?

The baby units may be out of range. 

Move the parent unit closer to the 

baby units (but not less than 3 feet).

If the parent unit is powered by the 

provided battery, it may not have 

enough charge for the parent unit to 

perform normally. Charge the  

battery in the parent unit for up to 

12 hours.

If your parent unit is in 

SPLIT-VIEW 

mode, some of your baby units may 

detect sounds.

The temperature of your baby’s 

room may be too high or too low.

Why can’t I 

establish a 

connection? 

Why is the 

connection 

lost every now 

and then? 

Why are there 

sound  

interruptions?

The baby units may be out of range. 

Move the parent unit closer to the 

baby units (but not less than 3 feet).

Other electronic products may 

cause interference with your baby 

monitor. Try installing your baby 

monitor as far away from these 

electronic devices as possible.

When using your equipment, basic safety precautions 

should always be followed to reduce the risk of fire, 

electric shock and injury, including the following:

Follow all warnings and instructions marked on the 

product.
Adult setup is required.
This product is intended as an aid. It is not 

a substitute for responsible and proper adult 

supervision and should not be used as such.
This product is not intended for use as a medical 

monitor.
Do not use this product near water. For example, 

do not use it next to a bath tub, wash bowl, kitchen 

sink, laundry tub or swimming pool, or in a wet 

basement or shower.

CAUTION: Use only the batteries indicated in 

this manual. There may be a risk of explosion if a 

wrong type of battery is used for the parent unit. 

Use only the supplied rechargeable battery or 

replacement battery pack (BT198555/BT298555) 

for the parent unit. Do not dispose of batteries in 

a fire. They may explode. Dispose of used battery 

according to the information in The RBRC

®

 seal.

Use only the adapters included with this product. 

Incorrect adapter polarity or voltage can seriously 

damage the product.  

Baby unit power adapter: Input 100-240V AC 

50/60 Hz; output: 6V DC 1A  

Parent unit power adapter: Input 100-120V AC 

50/60 Hz; output: 5V DC 1A. 

For pluggable equipment, the socket-outlet shall 

be installed near the equipment and shall be easily 

accessible.
The power adapters are intended to be correctly 

oriented in a vertical or floor mount position. The 

prongs are not designed to hold the plug in place 

if it is plugged into a ceiling, under-the-table or 

cabinet outlet.
Unplug this product from the wall outlet before 

cleaning. Do not use liquid or aerosol cleaners. 

Use a damp cloth for cleaning.
Unplug the power cords before replacing batteries.
Do not cut off the power adapters to replace them 

with other plugs, as this causes a hazardous 

situation.

1.

2.
3.

4.

5.

6.

7.

8.

9.

10.
11.

Do not allow anything to rest on the power cords. 

Do not install this product where the cords may be 

walked on or crimped.
This product should be operated only from the type 

of power source indicated on the

 

marking label. 

If you are not sure of the type of power supply 

in your home, consult your dealer or local power 

company.
Do not overload wall outlets or use an extension 

cord.
Do not place this product on an unstable table, 

shelf, stand or other unstable surfaces.
This product should not be placed in any area 

where proper ventilation is not provided. Slots and 

openings in the back or bottom of this product 

are provided for ventilation. To protect them from 

overheating, these openings must not be blocked 

by placing the product on a soft surface such as 

a bed, sofa or rug. This product should never be 

placed near or over a radiator or heat register.
Never push objects of any kind into this product 

through the slots because they may touch 

dangerous voltage points or create a short circuit. 

Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not 

disassemble this product, but take it to an 

authorized service facility. Opening or removing 

parts of the product other than specified access 

doors may expose you to dangerous voltages 

or other risks. Incorrect reassembling can cause 

electric shock when the product is subsequently 

used.
You should test the sound reception every 

time you turn on the units or move one of the 

components.
Periodically examine all components for damage.
Be aware of possible loss of privacy while using 

public airwaves. Conversations may be picked 

up by other nursery monitors, cordless phones, 

scanners, etc.
Children should be supervised to ensure that they 

do not play with  

the product.
The product is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

Use and store the product at a temperature 

betw

een 32

o

F and 104

o

F.

Do not expose the product to extreme cold, heat 

or direct sunlight. Do not put the product close to a 

heating source.

Batteries should not be exposed to excessive heat 

such as bright sunshine or fire.

Make sure the baby unit(s) and the adapter cord(s) 

are always out of reach of the baby, at least 3 feet 

12.

13.

14.

15.

16.

17.

18.

19.

20.
21.

22.

23.

1.

2.

3.

4.

away from the baby or crib, to avoid a possible 

strangulation hazard.

Never place the baby unit(s) inside the baby’s crib 

or p

laypen. Never cover the baby unit(s) or parent 

unit with anything such as a towel or a blanket.

Other electronic products may cause 

interference with your baby monitor. Try 

installing your baby monitor as far away from 

these electronic devices as possible: wireless 

routers, radios, cellular telephones, intercoms, 

room monitors, televisions, personal computers, 

kitchen appliances and cordless telephones.

pacemakers
Cardiac pacemakers (applies only to digital cordless 

devices):
Wireless Technology Research, LLC (WTR), an 

independent research entity, led a multidisciplinary 

evaluation of the interference between portable 

wireless devices and implanted cardiac pacemakers. 

Supported by the U.S. Food and Drug Administration, 

WTR recommends to physicians that:
Pacemaker patients

Should keep wireless devices at least six inches 

from the pacemaker.
Should NOT place wireless devices directly over the 

pacemaker, such as in a breast pocket, when it is 

turned ON.

WTR’s evaluation did not identify any risk to 

bystanders with pacemakers from other persons using 

wireless devices.

This VTech product complies with all standards 

regarding electromagnetic fields (EMF). If handled 

properly and according to the instru

ctions in this user’s 

manual, the product is safe to be used based on 

scientific evidence available today.

The RBRC

®

 seal on the lithium-ion battery indicates 

that VTech Communications, Inc. is voluntarily 

participating in an industry program to collect and 

recycle these batteries at the end of their useful lives, 

when taken out of service within the United States and 

Canada.

The RBRC

®

 program provides a convenient alternative 

to placing used lithium-ion batteries into the trash or 

municipal waste, which may be illegal in your area.
VTech’s participation in RBRC

® 

makes it easy for 

you to drop off the spent battery at local retailers 

participating in the RBRC

®

 program or at authorized 

VTech product service centers. Please call  

 for information on Li-ion battery 

recycling and disposal bans/restrictions in your 

area. VTech’s involvement in this program is part of 

its commitment to protecting our environment and 

conserving natural resources.

5.

6.

•

•

FCC Part 15
This equipment has been tested and found to comply 

with the requirements for a Class B digital device 

under Part 15 of the Federal Communications 

Commission (FCC) rules. These requirements are 

intended to provide reasonable protection against 

harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and 

receiver.
Connect the equipment into an outlet on a 

circuit different from that to which the receiver is 

connected.
Consult the dealer or an experienced radio/TV 

technician for help. 

Changes or modifications to this equipment not 

expressly approved by the party responsible for 

compliance could void the user’s authority to operate 

the equipment.
This device complies with Part 15 of the FCC rules. 

Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation.
To ensure safety of users, the FCC has established 

criteria for the amount of radio frequency energy 

that can be safely absorbed by a user or bystander 

according to the intended usage of the product. This 

product has been tested and found to comply with the 

FCC criteria. The baby unit shall be installed and used 

such that parts of all persons’ body are maintained at 

a distance of approximately 8 in (20 cm) or more. The 

transmitter and antenna shall be held at least 1 in  

(2.5 cm) from your face.

•
•

•

•

This Class B digital apparatus complies with Canadian 

requirement: 

CAN ICES-3 (B)/NMB-3(B)

Industry Canada
Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and 

(2) this device must accept any interference, including 

interference that may cause undesired operation.
Privacy of communications may not be ensured when 

using this product.
The term ‘’IC:‘’ before the certification/registration 

number only signifies that the Industry Canada 

technical specifications were met.
This product meets the applicable Industry Canada 

technical specifications.

RF radiation exposure statement
The baby unit complies with FCC RF radiation 

exposure limits set forth for an uncontrolled 

environment. The baby unit should be installed and 

operated with a minimum distance of 8 in (20 cm) 

between the baby unit

 

and all persons’ body. Use of 

other accessories may not ensure compliance with 

FCC RF exposure guidelines. This transmitter must 

not be co-located or operating in conjunction with any 

other antenna or transmitter. This equipment complies 

also with Industry Canada RSS-102 with respect to 

Canada’s Health Code 6 for Exposure of Humans to 

RF Fields.

This baby monitor meets the California Energy 

Commission (CEC) regulations for energy 

consumption. Your baby monitor is set up to comply 

with the energy-conserving standards right out of the 

box.
Follow the instructions to install and charge the battery. 

The CEC battery charging testing mode is activated 

while charging.
Even if the parent unit is paired to baby units, the CEC 

battery charging testing mode is activated while it is 

powered off and charging.

Mesures de sécurité importantes
Lorsque vous utilisez votre appareil, vous devriez 

toujours suivre certaines mesures de précaution 

de base afin de réduire les risques d’incendie, 

d’électrocution et de blessures corporelles, dont ceux 

qui suivent :

Observez toutes les instructions et mises en garde 

inscrites sur l’appareil.
L’installation par un adulte est requise.
Ce produit a été conçu pour être un dispositif 

d’appoint seulement. Il n’est pas le remplacement 

d’une supervision responsable et adéquate par un 

adulte et ne devrait pas être utilisé comme telle.
Ce produit n’est pas conçu pour être utilisé en tant 

que moniteur médical.
N’utilisez pas cet appareil près de l’eau ni de toute 

autre source d’humidité, par exemple, près d’une 

baignoire, cuve à lessive, évier de cuisine, dans 

un sous-sol humide ni près d’une piscine, dans un 

soussol humide ou une douche.
 

MISE EN GARDE: Il peut y avoir un risque 

d’explosion si vous utilisez le mauvais type de piles 

pour l’unité du parent. N’utilisez que le bloc-piles 

rechargeable inclus ou le bloc-piles de rechange 

(BT198555/BT298555). N’incinérez pas les piles. 

Celles-ci risqueraient d’exploser. Jetez les piles 

usées selon les renseignements suivant 

.

N’utilisez que les adaptateurs inclus avec ce 

produit. L’utilisation d’un adaptateur dont la 

polarité ou la tension serait inadéquate risque 

d’endommager sérieusement le produit et mettre 

votre sécurité en péril. 

Adaptateur de l’unité du bébé : 

Entrée 100-240V CA 50/60 Hz; Sortie : 6 V CC 1A 

Adaptateur de l’unité du parent : 

Entrée 100-120V CA 50/60 Hz; Sortie : 5 V CC 1A 

Pour les PRODUITS À BRANCHER À UNE 

PRISE DE COURANT, la prise de courant doit 

être installée près du produit, afin d’assurer une 

accessibilité sécuritaire à la prise de courant.
Lorsqu’ils sont branchés dans une prise de courant, 

les adaptateurs secteur ont été conçus pour être 

orientés correctement, soit à la verticale ou au 

plancher. Les broches n’ont pas été conçues 

pour supporter le poids du bloc d’alimentation et 

le maintenir en place si celuici est branché dans 

une prise au plafond, sous une table ou dans un 

meuble.
Débranchez ce produit de la prise de courant 

avant de procéder au nettoyage. N’utilisez pas de 

nettoyants en aérosols. Utilisez un chiffon humide 

pour le nettoyer.
Débranchez les cordons d’alimentation avant de 

remplacer le bloc-piles.
Ne coupez pas les cordons d’alimentation pour 

remplacer les fiches, car ceci peut présenter un 

danger potentiel.

1.

2.
3.

4.

5.

6.

7.

8.

9.

10.

11.

Ne laissez aucun objet reposer ni appuyer sur le 

cordon d’alimentation. N’installez pas cet appareil 

dans un endroit où l’on risque d’écraser le cordon 

d’alimentation ou de le piétiner.
Ne faites fonctionner cet appareil qu’avec le type 

d’alimentation indiqué sur l’étiquette. Si vous 

ne connaissez pas le type d’alimentation que 

vous possédez à votre domicile, consultez votre 

marchand ou votre compagnie locale d’électricité.
Ne surchargez pas les prises de courant murales 

ni les rallonges électriques.
Ne placez pas cet appareil sur un chariot, meuble, 

trépied, support de montage ni table chancelants.
Les trous et ouvertures du boîtier, situés à l’arrière 

de l’appareil ou sous celui-ci, servent à aérer 

l’appareil. Pour l’empêcher de surchauffer, ne 

bloquez sous aucun prétexte ces ouvertures et 

n’empêchez pas l’aération adéquate de l’appareil 

en le plaçant sur un lit, divan, tapis ou toute autre 

surface similaire. De même, ne le positionnez 

pas à proximité ni au-dessus d’une source de 

chaleur ou d’un calorifère. De plus, ne placez pas 

l’appareil dans un endroit avant de vous assurer 

qu’il y ait une bonne circulation d’air.
N’enfoncez jamais d’objets à travers les ouvertures 

de cet appareil, car ils pourraient entrer en 

contact avec des points de tension dangereux ou 

causer des courts-circuits qui peuvent dégénérer 

en incendies ou en risques d’électrocution. Ne 

renversez jamais de liquide dans ce produit.
Afin de réduire les risques d’électrocution, ne 

démontez pas cet appareil, mais apportez-le dans 

un centre de service autorisé. L’ouverture du 

boîtier ou le retrait de toutes pièces que contient 

cet appareil, à l’exception de l’accès autorisé à 

certaines portes ou ouvertures, risque de vous 

exposer à des points de tension dangereux ou 

d’autres dangers. Un remontage incorrect peut par 

la suite présenter des risques d’électrocution.
Vous devriez tester la réception chaque fois que 

vous mettez l’appareil en fonction.
Examinez les composantes afin de vérifier si 

celles-ci ne sont pas endommagées.
Soyez avisé de la perte de la confidentialité 

lorsque vous utilisez les ondes publiques. Les 

conversations peuvent être entendues par d’autres 

moniteurs de bébé, des téléphones sans fil, des 

scanneurs, etc.
Les enfants devraient être supervisés afin de vous 

assurer qu’ils ne jouent pas avec l’appareil.
Le produit n’est pas conçu pour être utilisé par des 

personnes (incluant des enfants) aux capacités 

physiques, sensorielles ou mentales réduites ou 

qui manquent d’expérience et de connaissances, 

à moins qu’on leur ait donné suffisamment 

de supervision ou d’instructions relativement 

à l’utilisation de l’appareil par une personne 

responsable de leur sécurité.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

Utilisez et entreposez le produit à une température 

entre 0˚ C (32˚F) et 40˚C (104˚ F).
N’exposez pas cet appareil à des froids ou des 

chaleurs extrêmes, ainsi qu’à la lumière directe 

du soleil. Ne l’installez pas près d’une source de 

chauffage.
Le bloc-piles ne doit pas être exposé à la chaleur 

excessive telle que la lumière du soleil ou au feu.
Assurez-vous que le moniteur et le cordon 

de l’adaptateur sont toujours hors de portée 

des enfants, à au moins 1 mètre (3 pieds) de 

l’enfant ou du berceau, pour éviter tout risque de 

strangulation.
Ne jamais placer le moniteur à l’intérieur du 

berceau ou du parc de bébé. Ne jamais couvrir le 

moniteur ou l’unité (s) portative avec un article tel 

une serviette ou une couverture.
D’autres équipements électroniques peuvent 

produire des interférences sur votre moniteur 

vidéo et audio. Tentez d’installer votre 

moniteur vidéo ou audio à l’écart des appareils 

électroniques tels que des routeurs sans fil, 

radios, téléphones cellulaires, interphones, 

moniteurs, téléphones, ordinateurs personnels, 

électroménagers et téléphones sans fil.

l’organisme
Les simulateurs cardiaques (ne s’applique qu’aux 

dispositifs numériques sans fil) :
L’organisme ‘Wireless Technology Research, LLC 

(WTR)’, une firme de recherche indépendante, a mené 

une évaluation pluridisciplinaire des interférences entre 

les téléphones sans fil portatifs et les stimulateurs 

cardiaques implantés dans l’organisme. Appuyée par 

l’Administration des aliments et drogues (FDA) des 

États-Unis, la firme WTR recommande aux médecins:

Vous devriez maintenir les dispositifs sans fil à au 

moins six pouces du simulateur cardiaque.
Ils ne doivent PAS placer le téléphone sans fil 

directement sur le stimulateur cardiaque, tel que 

dans une poche de chemise, lorsque celui-ci est en 

marche.

L’étude effectuée par l’organisme WRS n’a pas 

identifié de risque pour les détenteurs de simulateurs 

cardiaques causés par les gens qui utilisent dispositifs 

sans fil à proximité de ceux-ci.

Ce produit de VTech est conforme à toutes les normes 

se rapportant aux champs électromagnétiques (EMF) 

standard. Si vous le manipulez correctement en 

suivant les instructions de ce guide, son utilisation 

sera sécuritaire pendant de nombreuses années, 

selon les meilleures évidences scientifiques dont nous 

disposons aujourd’hui.

1.

2.

3.

4.

5.

6.

•

•

What does this limited warranty cover?
The manufacturer of this VTech Product warrants to 

the holder of a valid proof of purchase (“Consumer” or 

“you”) that the Product and all accessories provided in 

the sales package (“Product”) are free from defects in 

material and workmanship, pursuant to the following 

terms and conditions, when installed and used 

normally and in accordance with the Product operating 

instructions. This limited warranty extends only to the 

Consumer for Products purchased and used in the 

United States of America and Canada.

Product”)?
During the limited warranty period, VTech’s authorized 

service representative will repair or replace at 

VTech’s option, without charge, a Materially Defective 

Product. If we repair the Product, we may use new 

or refurbished replacement parts. If we choose to 

replace the Product, we may replace it with a new or 

refurbished Product of the same or similar design. 

We will retain defective parts, modules, or equipment. 

Repair or replacement of the Product, at VTech’s 

option, is your exclusive remedy. VTech will return the 

repaired or replacement Products to you in working 

condition. You should expect the repair or replacement 

to take approximately 30 days.

How long is the limited warranty period?
The limited warranty period for the Product extends 

for ONE (1) YEAR from the date of purchase. If VTech 

repairs or replaces a Materially Defective Product 

under the terms of this limited warranty, this limited 

warranty also applies to the repaired or replacement 

Product for a period of either (a) 90 days from the 

date the repaired or replacement Product is shipped to 

you or (b) the time remaining on the original one-year 

warranty; whichever is longer. 

What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, 

accident, shipping or other physical damage, 

improper installation, abnormal operation or 

handling, neglect, inundation, fire, water or other 

liquid intrusion; or

2. Product that has been damaged due to repair, 

alteration or modification by anyone other than an 

authorized service representative of VTech; or

3. Product to the extent that the problem experienced 

is caused by signal conditions, network reliability, or 

cable or antenna systems; or

4. Product to the extent that the problem is caused by 

use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product 

serial number plates or electronic serial numbers 

have been removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for 

repair from outside the United States of America 

or Canada, or used for commercial or institutional 

purposes (including but not limited to Products used 

for rental purposes); or

7. Product returned without a valid proof of purchase 

(see item 2 on the next page); or

8. Charges for installation or set up, adjustment of 

customer controls, and installation or repair of 

systems outside the unit.

How do you get warranty service?
To obtain warranty service in the USA, please visit 

our website at www.vtechphones.com or  

call 1 (800) 595-9511. In Canada, go to  

www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review the 

user’s manual - a check of the Product’s controls and 

features may save you a service call.
Except as provided by applicable law, you assume the 

risk of loss or damage during transit and transportation 

and are responsible for delivery or handling charges 

incurred in the transport of the Product(s) to the 

service location. VTech will return repaired or replaced 

Product under this limited warranty. Transportation, 

delivery or handling charges are prepaid. VTech 

assumes no risk for damage or loss of the Product 

in transit. If the Product failure is not covered by this 

limited warranty, or proof of purchase does not meet 

the terms of this limited warranty, VTech will notify you 

and will request that you authorize the cost of repair 

prior to any further repair activity. You must pay for the 

cost of repair and return shipping costs for the repair of 

Products that are not covered by this limited warranty.

Return the entire original package and contents 

including the Product to the VTech service location 

along with a description of the malfunction or 

difficulty; and
Include a “valid proof of purchase” (sales receipt) 

identifying the Product purchased (Product model) 

and the date of purchase or receipt; and
Provide your name, complete and correct mailing 

address, and telephone number.

Other limitations
This warranty is the complete and exclusive agreement 

between you and VTech. It supersedes all other 

written or oral communications related to this Product. 

VTech provides no other warranties for this Product. 

The warranty exclusively describes all of VTech’s 

responsibilities regarding the Product. There are no 

other express warranties. No one is authorized to make 

modifications to this limited warranty and you should not 

rely on any such modification.
State/Provincial Law Rights: This warranty gives you 

specific legal rights, and you may also have other rights, 

which vary from state to state or province to province.

1.

2.

3.

Limitations: Implied warranties, including those of 

fitness for a particular purpose and merchantability (an 

unwritten warranty that the Product is fit for ordinary use) 

are limited to one year from the date of purchase. Some 

states/provinces do not allow limitations on how long an 

implied warranty lasts, so the above limitation may not 

apply to you. In no event shall VTech be liable for any 

indirect, special, incidental, consequential, or similar 

damages (including, but not limited to lost profits or 

revenue, inability to use the Product or other associated 

equipment, the cost of substitute equipment, and claims 

by third parties) resulting from the use of this Product. 

Some states/provinces do not allow the exclusion or 

limitation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you. 

Frequency 

control

Crystal controlled PLL synthesizer

Transmit 

frequency

Baby unit: 2406 - 2475 MHz

Parent unit: 2406 -2475 MHz

Channels

24

LCD

4.3” Color LCD  

(WQVGA 480x272 pixel)

Nominal 

effective range

Maximum power allowed by FCC 

and IC. Actual operating range may 

vary according to environmental 

conditions at the time of use.

Power 

requirements

Parent unit: 3.7V Li-polymer battery
Baby unit power adapter:  

Input: 100-240V AC 50/60Hz

Output: 6V DC @ 1A
Parent unit power adapter:  

Input: 100-120V AC 50/60Hz

Output: 5V DC @ 1A

VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is the registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2015 for VTech Communications, Inc.
All rights reserved. 02/15. VM343_CIB_V1.0

Designed to fit your home.
And your life.