VTech Telecommunications Ltd 80-9875-00 Manual De Usuario
Getting started
8
Battery installation and charging
Step 3
Charge the handset by placing it face forward in the
charger. The CHARGE light on the top of the handset is
on during charging.
charger. The CHARGE light on the top of the handset is
on during charging.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
.
In Canada, dial
1 (866) 288-4268
.
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
to prevent possible leakage.
•
•
CHARGE light
After you install your telephone or power returns following
a power outage, the handset and base will prompt you to
set the date and time. For instructions on setting the date
and time using a cordless handset or the telephone base,
see Set date/time on page 15 and page 26, respectively.
To skip setting the date and time, press
a power outage, the handset and base will prompt you to
set the date and time. For instructions on setting the date
and time using a cordless handset or the telephone base,
see Set date/time on page 15 and page 26, respectively.
To skip setting the date and time, press
OFF
/CANCEL on
a cordless handset or CANCEL on the telephone base.
After the date and time setting is done or skipped, the
telephone base will prompt if you want to set up the
answering system. Press
telephone base will prompt if you want to set up the
answering system. Press
MENU
/
SELECT to start the
answering system setup via voice guide. For more details,
see Voice guide on page 79. To skip the setup, press
CANCEL on the telephone base.
see Voice guide on page 79. To skip the setup, press
CANCEL on the telephone base.
Step 2
Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
until it clicks into place.
HAUT
i-MH
)
S.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Setup Ans sys?