VTech Telecommunications Ltd 80-9875-00 Manual De Usuario
Multiple handset use
49
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single handset. When the
telephone base is not in use:
If you have one handset, press and hold PTT/
FLASH
.
If you have more than one handset:
Press PTT/
FLASH
, then, use the dialing keys to
enter the destination handset number.
-OR-
Press
CID
or
DIR
to highlight the destination
handset number, then press
MENU
/SELECT or
PTT/
FLASH
.
The telephone base shows Connecting to HANDSET
X... (HANDSET represents the handset name, X
represents the destination handset number) for a few
seconds. When the connection is made, both the
telephone base and destination handset display
Press and hold [PTT] to talk.
X... (HANDSET represents the handset name, X
represents the destination handset number) for a few
seconds. When the connection is made, both the
telephone base and destination handset display
Press and hold [PTT] to talk.
2. Press and hold PTT/
FLASH
. A chirp indicates your
microphone is on. Speak towards the telephone base.
Your voice is broadcast to the destination handset.
Your voice is broadcast to the destination handset.
While you are speaking, the telephone base shows
PTT To handset: X.
PTT To handset: X.
3. Release PTT/
FLASH
after speaking. Both devices beep once again
and the screens show Press and hold [PTT] to talk. Then, you can
press and hold PTT/
press and hold PTT/
FLASH
to continue speaking or the destination device
can respond (see Answer a PTT call on page 51).
4. To end the PTT call, press CANCEL. The telephone base shows
Push to talk Ended for a few seconds.
•
•
PTT To
handset: X
Connecting to
Handset X...
Press and hold
[PTT] to talk
PUSH TO TALK
>Handset X