VTech Telecommunications Ltd 80-9875-00 Manual De Usuario
Multiple handset use
52
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a one-to-one PTT call, press
PHONE/
FLASH
on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and
the outside call is answered.
During a one-to-group PTT call, press
PHONE/
FLASH
on the initiating
handset or
/SPEAKER on the initiating telephone base. The PTT call
ends automatically and the outside call is answered.
During a one-to-group PTT call, press
PHONE/
FLASH
on any one of the
destination handsets, or press
/SPEAKER on the destination telephone
base. That device answers the outside call. The PTT call continues for the
rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/
CANCEL
on your handset or CANCEL on your telephone base.
The telephone continues to ring.
Make an outgoing call during a PTT call
During a one-to-one PTT call, press
PHONE/
FLASH
on your handset or
/SPEAKER on your telephone base to get a dial tone. The PTT call ends
automatically.
During a one-to-group PTT call, press
PHONE/
FLASH
on the initiating
handset or
/SPEAKER on the initiating telephone base. The PTT call
ends automatically and you get a dial tone.
During a one-to-group PTT call, press
PHONE/
FLASH
on any one of the
destination handsets or press
/SPEAKER on the destination telephone
base. That device gets a dial tone. The PTT call continues for the rest of
the PTT participants.
the PTT participants.
End or leave a PTT call
The initiating device can end the PTT call. If any one of the destination devices
leaves the PTT call, the call continues until all participants or the initiator hangs up.
leaves the PTT call, the call continues until all participants or the initiator hangs up.
Press
OFF/
CANCEL
on the handset or place the handset in the charger, or
press CANCEL on the telephone base. The screen shows Push to talk Ended.
NOTE: After PUSH TO TALK on the handset or PTT/
FLASH
on the telephone base is released,
the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset
or PTT/
or PTT/
FLASH
on the telephone base within 10 seconds, the PTT call ends automatically.
•
•
•
•
•
•
•
Push-to-talk (PTT)
Press
PHONE/
FLASH
or any dialing key (0-9, # or TONE ) on the destination
handset, or press /SPEAKER or any dialing key (0-9, # or TONE ) on the
telephone base or lift the corded handset to answer. Both devices show Intercom.
telephone base or lift the corded handset to answer. Both devices show Intercom.
To end the intercom call, press
OFF/
CANCEL
on your handset or place
the handset in the charger, or press CANCEL on the telephone base. Both
screens show Intercom ended.
screens show Intercom ended.
3.
4.