DEI Headquarters Inc. DEI6711 Manual De Usuario

Descargar
Página de 30
31
© 2008 Directed Electronics. All rights reserved.
mote Start tone plays.
The preset remote start run time is 12 minutes. This can be changed to between 
12 and 60 minutes.
The system has a feature, if programmed On , that automatically notifies you 
when the runtime is running low. When the system reaches 3-minutes of runtime 
remaining, it sends the 2-way remote control a paging signal. 
Points to remember
If the hood is open or if the brake pedal is pressed, the vehicle will not remote 
start. 
The remote start shuts down:
When the brake pedal is pressed.
• 
The hood is opened.
• 
When the remote start command is sent again from a remote control.
• 
When the runtime expires.
• 
 Points to remember
If the hood is open or is the brake pedal is pressed, the vehicle will not 
start using remote start. The remote starter shuts down: 
When the brake pedal is pressed 
• 
The hood is opened 
• 
If the alarm is triggered when armed.
• 
When the Remote Start command is sent again from a remote   
• 
control
 
 Runtime Check
To check the amount of runtime remaining (2 way remote only):
 
After the vehicle is remote started, press the 
AUX
 button three-times and 
then hold until the remote beeps, and then release. The display will 
show a text indicating remaining run time.