DEI Headquarters Inc. DEI7941 Manual De Usuario
Getting Started
Your remote will first need to be charged before proceeding. If not
already charged please do so now as you read on and familiarize
yourself with the many feature your system offers.
already charged please do so now as you read on and familiarize
yourself with the many feature your system offers.
Charging the remote control
Your remote control has an internal rechargeable battery. No other
power source is required. The battery can be charged using the sup-
plied wall charger.
power source is required. The battery can be charged using the sup-
plied wall charger.
Connect the supplied wall charger to a wall outlet.
1.
Connect the USB end of the power cord to the device’s mini-
2.
USB connector. Please note that if the battery is completely
discharged, it may take a while before the charging indicator
illuminates.
discharged, it may take a while before the charging indicator
illuminates.
1-800-274-0200
RPN 7941V
IC: 1513A-7941
FCC ID:EZSDEI7941
1-800-274-0200
RPN 7941P
IC: 1513A-7941
FCC ID:EZSDEI7941
1-800-274-0200
RPN 7941X
IC: 1513A-7941
FCC ID:EZSDEI7941
Please charge your remote control for at least 2 hours before use.
3.
When the battery is fully charged, the status screen will indicate
4.
battery is full.
Disconnect the mini-USB end from the remote control first.
Disconnect the mini-USB end from the remote control first.
5.
Then disconnect the charger from the wall outlet.
6.
IMPORTANT:
The included charger is NOT a USB standard-output
charger - it is intended for rapid charging of Responder HD remotes!
NEVER use this charger to charge any other products, even if the
USB-style connector fits! The Responder HD remote can charge safely
with any USB connection -it may take longer to reach a fullycharged
state.
NEVER use this charger to charge any other products, even if the
USB-style connector fits! The Responder HD remote can charge safely
with any USB connection -it may take longer to reach a fullycharged
state.