Bird Technologies Group 25999 Manual De Usuario

into your SNMP manager software. The MIB
files allow the SNMP manager software to sort
out the trap messages into an understandable
message format.

The signal booster supports several SNMP Config-
uration validation checks which help ensure the
configuration is setup in a logical format. The vali-
dation checks include;

A) If encryption is enabled but authentication is not

enabled a popup window will appear stating that
you must enable authentication when encryp-
tion is enabled.

B) If Authentication and/or Encryption is enabled

and a password is entered which is < 8 charac-
ters long an error message will be displayed.

C) If an IP address is entered but a User Name is

not entered a popup warning will appear but the
changes will be submitted.

D) If a User name is entered but an IP address is

not entered a popup warning will appear but the
changes will be submitted.

SNMP MANAGER EXAMPLE

SNMP manager software is designed to provide a
GUI style interface for the user so that traps sent
from the booster can be received and displayed for
viewing. The SNMP manager software chosen and
used by the customer is up to the customers dis-
cretion and as such may not exactly match the
example shown in this discussion. SNMP manager
software packages will need to be properly config-
ured in order to successfully receive messages
from the booster. Refer to the SNMP configuration
setup discussed earlier in this manual and ask your
IT specialists for assistance.

When a qualifying event occurs in the booster a
trap is formulated and sent to the destination com-
puter. A typical trap is shown in Figure 15. In the
example shown the trap messages are shown at
the top of the screen display. Three trap messages
have been received by this manager from a signal
booster. In this particular SNMP manager software

Figure 15: SNMP Manager example.