Bird Technologies Group 26076 Manual De Usuario

new user name and associated password. Confirm
the new password by entering it again and then
press the Create User button. Make sure you write
down the new user name and password for safe
keeping. A menu box for deleting a user is also pre-
sented. To delete a user enter their user name in
the box and click on the Delete User button.

Signal boosters manufactured by Bird Technolo-
gies can perform for years with little maintenance
and repair. However, if the amplifiers are subjected
to excessively high signal levels, power surges or
lightning strikes, failures may occur. The following
procedures may be followed for detecting a mal-
functioning unit or as part of a periodic mainte-
nance program.

1) The heatsink area should be cleared of dust

and debris.

2) Inspect the unit to see that the front door Status

LED is lit (remove any dust or debris that may
obscure the LED). This will verify that operating
power is flowing properly. Check all hardware
for tightness.

3) Compare system performance to initial perfor-

mance levels measured when the system was
first installed. Or measure the gain at any con-
venient frequency in the working frequency
band to verify that the performance is still within
specifications.