Bird Technologies Group 6138X Manual De Usuario

PROCEDURE

Before a networked connection can be established,
the booster LAN Port must be changed to an IP
address that’s compatible with your network. If you
are unsure how to determine this address check
with your IT support personnel. To connect the
booster LAN port to a networked environment and
access the web page interface, perform the follow-
ing steps;

1) Change the boosters LAN port IP address. To

do this, direct connect your laptop to the
booster as discussed in the earlier section of
this appendix titled “Direct Connection” and fol-
low steps 1 through 4.

2) Launch the configuration Applet in your web

browser.

3) Click the “Admin” tab at the top of the interface

display screen.

4) To be safe, take note of the settings currently

displayed.

5) Select the “User Static IP” radio button.

6) Enter the following settings provided by your

network administrator;

A)  IP Address

B)  Subnet Mask

C)  Gateway Address

7) Click the “Submit” button to apply the changes.

8) Once the changes have been successfully

applied close your web browser.

9) Launch the configuration Applet in your web

browser using the newly entered IP address.