B+B SmartWorx THINQ1 Manual De Usuario
Quatech SDS User’s Manual
Enabling Wi-Fi Device Servers
Step
Procedure
Description
Note: The Channel setting is only used in Ad
hoc mode. In Infrastructure mode, the AP
determines the channel.
hoc mode. In Infrastructure mode, the AP
determines the channel.
Step 11
Press Submit to configure the SDS with
your settings.
The IP Address Update successful screen
displays.
Step 12
Reset the SDS.
Click on the link to perform a remote reset,
and then press Reset.
Step 13
Remove the Ethernet cable from the SDS
during the reset process.
Be sure to remove the Ethernet cable before
the reset process is finished.
Step 14
Leaving the Ethernet port unconnected,
perform the procedure shown in Installing
perform the procedure shown in Installing
skipping
□ Step 6
.
When you are finished, you are ready to
install your wireless SDS in its final
install your wireless SDS in its final
location. For details on connecting your
skipping
□ Step 3.
March 2005
940-0183-151
Page 15