B+B SmartWorx WLNG1 Manual De Usuario
Set up the All-in-One
12
Install the print cartridge
1.
Turn off the All-in-One by pressing and holding the green Power button for three seconds if it is
not already off.
not already off.
IMPORTANT:
Always turn the All-in-One off before installing a print cartridge.
2.
Remove the protective tape from the print cartridge by pulling it straight out.
1
Metal contacts
2
Ink nozzles
IMPORTANT:
Hold the print cartridge by its sides, as shown above. Do not touch the metal
contacts or the ink nozzles.
3.
Push the side button to release the door, and swing the door open.
1
Door