B+B SmartWorx WLNG551 Manual De Usuario
40
fIgURE 9-5
Problems printing correctly
Problem
Cause
solution
The print smears after
printing.
printing.
The ink is not dry.
• Allow more time for the ink to dry.
• Try to avoid printing on surfaces that take longer to dry,
such as plastic sleeves, tape, etc.
• Increase air flow in the area.
• Make sure the printed surface is dry.
• Increase the temperature in the area.
• Lower the humidity of the area
• Change to Fast Dry template.
• Try to avoid printing on surfaces that take longer to dry,
such as plastic sleeves, tape, etc.
• Increase air flow in the area.
• Make sure the printed surface is dry.
• Increase the temperature in the area.
• Lower the humidity of the area
• Change to Fast Dry template.
The ink is not dry due to stacking or contact
with other objects.
with other objects.
Allow the ink to dry before placing printed materials on top
of or next to each other.
of or next to each other.
Print rubs off
The printing was done on a non-porous
material.
material.
Allow the ink to dry before placing the printed area in
contact with other objects.
contact with other objects.
SP400X Series - 9. Troubleshoot problems and get support