B+B SmartWorx WLNG551 Manual De Usuario
50
NOTE
: for a description of the information that is contained in the default print templates, see the Handheld SP400X Series Template Design
Software Users Guide. It is available at
www.handheldgroup.com/manuals
.
To turn the SP400X on in demonstration mode, press the
ClEAR
button while pressing the
POWER bUTTON
.
To move between these print templates on the SP400X while in demonstration mode, press the
ClEAR
button. you will hear one Hi tone
when the system information template is selected, two when the generic sp400 template is selected, and three when the nozzle health
diagnostic template is selected, and so on.
diagnostic template is selected, and so on.
The SP400X can save up to nine demonstration print templates if there is enough memory on the SP400X.
The system information print template and the nozzle health diagnostic print template contain information that is useful to service
technicians when problems arise.
technicians when problems arise.
To restore the default templates, follow these steps:
1. Click
Printer Restore to factory Default Templates.
2. Turn the SP400X off and then turn it back on.
fIgURE 10-6
System information print template
fIgURE 10-7
sp400 Demo print template
fIgURE 10-8
Pen Diagnostic print template
fIgURE 10-9
sp400 Default (wireless) print template
SP400X Series - 10. Advanced use