Digital Security Controls Ltd. 00LINKS2450 Manual De Usuario

6

CAUTION: Due to the sensitivity of the RF circuitry, avoid any contact with the coils
and potentiometers on the LINKS2450 circuit board.

*If power supply supervision is required for the LINKS2450 VTX terminals, use the
PC4204. If no supervision is needed, you can use the PS1520 or the control panel
Bell+/Aux- terminals .

NOTE: Programming section [01], option 2 must be ON for LINKS2450 to work with
these panels.

11

Program 2 digit reporting codes for the following:

• General Zone Fault Alarm

This code will be sent when the LINKS2450 receives a General Zone Fault
Alarm event from the PC1575/1580.

• General  System Tamper Alarm

This code will be sent when the LINKS2450 receives a General System
Tamper Alarm event from the PC1575/1580.

• General  System Supervisory Alarm

This code will be sent when the LINKS2450 receives a General System
Supervisory  Alarm event from the PC1575/1580.

Program 2 digit reporting codes for the following (see your PC1575/1580 Installation
Manual for more information):

• General Zone Fault Restoral: This code will be sent when the LINKS2450

receives a General  Zone Fault Restoral event from the PC1575/1580.

• General System Tamper Restoral: This code will be sent  when the

LINKS2450 receives a General System Tamper Restoral event from the
PC1575/1580.

• General System Supervisory Restoral: This code will be sent when the

LINKS2450 receives a General System Supervisory Restoral event  from the
PC1575/1580.

NOTE: Sections [81] and [82] apply to the PC1575/1580 only. All other panels will
use the reporting codes that are programmed for these events in the panel.

Program 2 digit reporting codes for the following (see your PC1555/1565 Installation
Manual for more information):

• Police Code: This code will be sent when the LINKS2450 receives a Police

Code event from the PC1555/1565.

• Delinquency Code: This code will be sent when the LINKS2450 receives a

Delinquency event from the PC1555/1565.