Digital Security Controls Ltd. 12GS3125 Manual De Usuario
GS3125/GS3105
53
G
G
G
G
G
INTRODUCTION
Devices in the GS3105 and GS3125 series are GSM communicators which, in the absence of a PSTN line, transmit vocal
or digital alarms to System III or System II receivers, via GPRS. You can have the following items for each series:
— The GS3105-K and GS3125-K kits, including GSM/GPRS communicator, antenna with cable from 2 meters, metal
or digital alarms to System III or System II receivers, via GPRS. You can have the following items for each series:
— The GS3105-K and GS3125-K kits, including GSM/GPRS communicator, antenna with cable from 2 meters, metal
bracket and PCLINK-PCLINK cable;
— The GS3105-BA and GS3125-BA kits, including GSM/GPRS communicator, antenna with 25 cm wire, casing and PCLINK-PCLINK cable.
— The GS3100-BX kits, including antenna with 25 cm wire and casing.
All information relating to a specific version shall be attested to by reference to the the corresponding code. The word
“Communicator” is being used to describe functions which are common to the various versions.
This manual provides programming and operation of the GSM/GPRS alarm Communicator. If there are any special
installation requirements, the remote ANT-EU outdoor antenna may be used.
— The GS3100-BX kits, including antenna with 25 cm wire and casing.
All information relating to a specific version shall be attested to by reference to the the corresponding code. The word
“Communicator” is being used to describe functions which are common to the various versions.
This manual provides programming and operation of the GSM/GPRS alarm Communicator. If there are any special
installation requirements, the remote ANT-EU outdoor antenna may be used.
This Device is fixed and shall be installed by Service Persons only (service person is defined as a person
having the appropriate technical training and experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of measures to minimize the risks to that person or other
persons). It shall be installed and used within an environment that provides the pollution degree max 2, over
voltages category II, in non-hazardous, indoor locations only. This manual shall be used with the Installation
Manual of the alarm control panel. All instructions specified within that manual must be observed.
having the appropriate technical training and experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of measures to minimize the risks to that person or other
persons). It shall be installed and used within an environment that provides the pollution degree max 2, over
voltages category II, in non-hazardous, indoor locations only. This manual shall be used with the Installation
Manual of the alarm control panel. All instructions specified within that manual must be observed.
Features
Technical Specifications
The input voltage to this Communicator can be drawn from the Control Panel or provided by an external power supply (not supplied).
Simulates land line
Switches automatically to GSM Network in the event of
Switches automatically to GSM Network in the event of
land line trouble (line down)
Manages and signals Incoming/Outgoing calls
GSM signal indicator
3 programmable terminals as Open Collector Outputs or
GSM signal indicator
3 programmable terminals as Open Collector Outputs or
Input Lines (GS3125 series only)
Land line overvoltage protection
GSM Quad-Band
Antenna with magnetic base
SMS dialer (GS3125 series only)
Voice dialer (GS3125 series only)
Supports Contact ID communication format from a connected
GSM Quad-Band
Antenna with magnetic base
SMS dialer (GS3125 series only)
Voice dialer (GS3125 series only)
Supports Contact ID communication format from a connected
control panel for communication over the GPRS network
GPRS/Internet communication with receivers Sur-Gard
System III / II
PC-programmable options
Pass-through function for connecting up to a DSC Power
Pass-through function for connecting up to a DSC Power
Series PC1864 control panel (GS3125 series only).
11 SMS messages, each with a maximum length of
100 characters (2 for each Input Line plus 4 for Status
Indications and 1 Periodic), GS3125 series only
Indications and 1 Periodic), GS3125 series only
8 telephone numbers (max. 16 digits) programmable for
the SMS dialer (GS3125 series only)
4 phone numbers programmable for Contact ID Dialer on GPRS
Up to 100 telephone numbers (max.16 digits) pro-
Up to 100 telephone numbers (max.16 digits) pro-
grammable for the remote activation of the OC output
Remote activation of the outputs through caller
identification and/or SMS transmission (SMS
transmission for the GS3125 series only)
transmission for the GS3125 series only)
Credit balance check for pre-paid SIM CARDS (GS3125
series only)
(PTM) monitoring of communication with the control unit
Models
GS3105-K, GS3125-K
GS3105-BA, GS3125-BA
Input Voltage
between 10 and 27.6 V
_
Standby current
100 mA maximum (not including the outputs) at 13.8 Vdc
Maximum alarm (Transmitting) current
250 mA average (not including the outputs) at 13.8 Vdc
Outputs
3 open collector, 100 mA
Operating frequency
900/1800 MHz or 850/1900 MHz
Maximum loop resistance of line between
the device connected in series on LI
1 Kohm
Maximum number of parallel devices
connected on LI
connected on LI
1
Operating Temperature
5 to 40 °C / 41 to 104 °F
Dimensions (WxHxD)
60.5x142x15.3 mm
(PCB only)
90x190x75 mm
(without antenna)
Weight
66 g
348 g