Digital Security Controls Ltd. 13HS2KRFP9 Manual De Usuario
6 W i r e l e s s K e y s a n d o t h e r D e v i c e s
20
6.3.1 Using the Keypad to Lookup the Number to Call for SMS Commands
The phone number of the system is programmed by the installer. To quickly find the phone number
perform the following steps
perform the following steps
.
6.3.2 Sending SMS Commands to your System
In order to successfully send commands to your system from your cellphone, you must send SMS messages
in the proper format. If configured, commands require the inclusion of a User Access Code in your
message. The access code will be verified by the system before executing any commands.
in the proper format. If configured, commands require the inclusion of a User Access Code in your
message. The access code will be verified by the system before executing any commands.
Additional information about sending SMS commands:
• Text messages are not case sensitive and extra spaces are ignored.
• In multi-partition systems and if the User has rights to manage the desired partitions, commands can
• In multi-partition systems and if the User has rights to manage the desired partitions, commands can
be sent to specific partitions by including the partition number. For more information on partitions see section 10 "Managing Partitions".
• If the panel is configured to require an Access Code and the code is not sent or is invalid, the panel
will send a notification to the user advising the command was unsuccessful.
Table 6-1 lists all available SMS commands with examples of how to enter the Partition number and access
codes. The format for entering commands is as follows:
codes. The format for entering commands is as follows:
To find the System’s Phone Number
What you see
1. Check that the Ready
indicator is on and the system is disarmed.
Date Time
JAN 02/13 2:06a
JAN 02/13 2:06a
2. Press
OR
press
and use the scroll keys
to navigate to User Functions and
press
. If required enter your [access code].
Press (*) for <>
User Functions
User Functions
3. Press
or use the scroll keys
to navigate to SMS Pro-
gramming and press
Press (*) for <>
SMS Programming
SMS Programming
4. Scroll
to navigate to SMS Programming and press
. The phone
number to send your SMS commands to displays.
Press (*) for <>
GSM Phone No.
GSM Phone No.
Command Partition
number
Access
Code
Stay Arm
001
1234
NOTES: Verify with your installer that the Partition number and access code are required in your SMS
message. If one or both are not required, do not enter them in your SMS message.
Responses to Status and Alarm Memory requests may require more than 1 SMS message,
depending on status of the system. There is a 10 second delay between transmission of SMS
messages.
depending on status of the system. There is a 10 second delay between transmission of SMS
messages.
Table 6-1 SMS Commands
Commands
Notes
Stay Arm
Stay arms the system.
Away Arm
Away arms the system.
Night Arm
Night arms the system.
Disarm
Disarms the system.
Activate Command Output 1
Activates Output 1.
*
6
*
*
1
1
*
*
DRAFT
3