Digital Security Controls Ltd. 18LE2077 Manual De Usuario

34

[617] Help

Default (Help);

When help is sent, the SMS response is a listing of all interactive commands that can be sent to 
the module. Access Code is not required.

[619] Keypad Message

Default (Keypad Message);

The response format is: [Account Label] [Date and Time] [SMS Function] [Response] [Message 
Text]. Fields are space delimited.When Keypad Message is sent, the SMS response is the mes-
sage displayed on the keypad. If the message is too long to display on the keypad, only the por-
tion displayed is sent in the response. 

SMS C

OMMAND

 

AND

 C

ONTROL

 R

ESPONSE

NOTE: SMS Command and Control Response messages are up to 32 ASCII characters 

(Maximum 160 characters per SMS message). The message language is specified in Section 

[009]. SMS responses are sent to the phone that initiated the command. 
[621] Function Successful

Default (Successful);

When an SMS Command and Control function is successfully performed by the panel, the suc-
cessful label is included in the response sent to the user, following the command requested. 
(e.g., if “stay armed” command is completed by the panel, SMS response is: “stay armed suc-
cessful”).

[622] Function Unsuccessful

Default (Unsuccessful);

When an SMS Command and Control function is not successfully performed by the panel, the 
command sent to the unit will be included in the response sent to the user, followed by this 
label. (e.g., if “stay armed” command is not completed, SMS response is: “stay armed unsuc-
cessful”).

[623] Invalid Command

Default (Invalid Command);

This label will be included in the response message if the command was not accepted as a valid 
SMS command.

[624] System Stay Armed

Default (Stay Armed);

This label will be included in the response to a status request command if a partition is stay 
armed.

[625] System Away Armed

Default (Away Armed);

This label will be included in the response to a status request command if a partition is away 
armed.

[626] System Night Armed

Default (Night Armed);

This label will be included in the response to a status request command if a partition is night 
armed.

[627] System Disarmed Ready

Default (Disarmed Ready);

This label will be included in the response to a status request command if a partition is disarmed 
and is ready to arm.