Digital Security Controls Ltd. 18LE2077 Manual De Usuario
34
[617] Help
Default (Help);
When help is sent, the SMS response is a listing of all interactive commands that can be sent to
the module. Access Code is not required.
the module. Access Code is not required.
[619] Keypad Message
Default (Keypad Message);
The response format is: [Account Label] [Date and Time] [SMS Function] [Response] [Message
Text]. Fields are space delimited.When Keypad Message is sent, the SMS response is the mes-
sage displayed on the keypad. If the message is too long to display on the keypad, only the por-
tion displayed is sent in the response.
Text]. Fields are space delimited.When Keypad Message is sent, the SMS response is the mes-
sage displayed on the keypad. If the message is too long to display on the keypad, only the por-
tion displayed is sent in the response.
SMS C
OMMAND
AND
C
ONTROL
R
ESPONSE
NOTE: SMS Command and Control Response messages are up to 32 ASCII characters
(Maximum 160 characters per SMS message). The message language is specified in Section
[009]. SMS responses are sent to the phone that initiated the command.
[621] Function Successful
[621] Function Successful
Default (Successful);
When an SMS Command and Control function is successfully performed by the panel, the suc-
cessful label is included in the response sent to the user, following the command requested.
(e.g., if “stay armed” command is completed by the panel, SMS response is: “stay armed suc-
cessful”).
cessful label is included in the response sent to the user, following the command requested.
(e.g., if “stay armed” command is completed by the panel, SMS response is: “stay armed suc-
cessful”).
[622] Function Unsuccessful
Default (Unsuccessful);
When an SMS Command and Control function is not successfully performed by the panel, the
command sent to the unit will be included in the response sent to the user, followed by this
label. (e.g., if “stay armed” command is not completed, SMS response is: “stay armed unsuc-
cessful”).
command sent to the unit will be included in the response sent to the user, followed by this
label. (e.g., if “stay armed” command is not completed, SMS response is: “stay armed unsuc-
cessful”).
[623] Invalid Command
Default (Invalid Command);
This label will be included in the response message if the command was not accepted as a valid
SMS command.
SMS command.
[624] System Stay Armed
Default (Stay Armed);
This label will be included in the response to a status request command if a partition is stay
armed.
armed.
[625] System Away Armed
Default (Away Armed);
This label will be included in the response to a status request command if a partition is away
armed.
armed.
[626] System Night Armed
Default (Night Armed);
This label will be included in the response to a status request command if a partition is night
armed.
armed.
[627] System Disarmed Ready
Default (Disarmed Ready);
This label will be included in the response to a status request command if a partition is disarmed
and is ready to arm.
and is ready to arm.