ADC Telecommunications Inc. PSM0800M Manual De Usuario
FlexWave Prism Remote Unit RF Module Installation Guide
Page 43
TECP‐77‐141 Issue 6 • 300001744178 Rev F • July 2014
©2014 TE Connectivity
Power on the RF Module
1
Follow the rules listed below to toggle the Power switch that corresponds to the RF Module to its ON position.
•
For Dual‐Band Dual‐Bay RF Modules, use the Power switch for the lower module. For example, to power
up a Dual‐Bay RF Module in combined bays C+D in a Quad‐Bay chassis, turn ON DC Power switch for Mod
C; leave the DC Power switch for Mod D OFF.
up a Dual‐Bay RF Module in combined bays C+D in a Quad‐Bay chassis, turn ON DC Power switch for Mod
C; leave the DC Power switch for Mod D OFF.
•
A Legacy Dual‐Bay 40W RF Module uses the Power Supplies in both bays. If the Legacy Dual‐Bay 40W RF
Module is installed in bays C+D, turn ON the Power switch for Mod C and Mod D.
Module is installed in bays C+D, turn ON the Power switch for Mod C and Mod D.
Bay A
SeRF
Module
AC/DC Power
switch for
PRU chassis
DC Power switch for Bay A
DC Power switch for Bay B
DC Power switch for Bay C
DC Power switch for Bay D
Bay B
Bay C
Bay D
2
Repeat all the steps in
to install other RF Modules.