ADC Telecommunications Inc. PSM1900M Manual De Usuario

This manual provides the information you need to install TE Connectivity FlexWave Prism

®

RF

Modules into a Prism Remote Unit (PRU). Installation instructions are provided for the following
Prism Remote Unit RF Modules:

Single‐Slot RF Modules, which includes the HDM RF Modules

Dual‐Slot RF Modules

Dual‐Card RF Modules

– 40W RF Modules.

This installation guide documents the RF Modules that are compatible with the FlexWave Prism 
Remote Unit, which is designed for outdoor use. For information on the RF Modules designed for 
use with the FlexWave Prism Indoor Remote Units (IRUs), see the FlexWave Prism Indoor Remote 
Unit Installation Guide (TECP‐77‐197).

Table 1. 

1

April 2012

Original

2

February 2013

Changed Prism remote Unit model names from Single-/Dual-/Tri-/Quad-Band to 
Single-/Dual-/Tri-/Quad-Bay; updated 

 to add new RF Modules; removed the 

Specifications section, which included the RF and Optical Specifications and the Frequency and 
Composite Output Power at Antenna Port (dBm) for Prism Remote Units tables; to access these 
performance specifications, refer to the FlexWave Prism Performance Specifications (TECP-77-201); 
updated 

.

3

May 2013

Updated 

; added 

.

4

October 2013

Added support for the following HDM RF Modules, in conjunction with Prism EMS Software Release 
8.1.1: HDM AWS Band 4 MIMO 20W; HDM AWS Band 4 SISO 40W; HDM PCS Band 25 SISO 40W 
(see 

); updated 

5

November 2013

Adds support for the