ADC Telecommunications Inc. PSM1900M Manual De Usuario

: This equipment complies with the applicable sections of Title 47 CFR Part 15 (Host Unit), Part

22 (800 MHz Cellular), Part 24 (1900 MHz ‐ PCS), Part 90 (800/900 ‐ SMR), and Part 27
(2100 MHz ‐ AWS) & (700 MHz ‐LTE).

: This equipment complies with the applicable sections of RSS‐131. The term “IC:” before the

radio certification number only signifies that Industry Canada Technical Specifications were met.
The Manufacturer's rated output power of this equipment is for single carrier operation. For
situations when multiple carrier signals are present, the rating would have to be reduced by 3.5
dB, especially where the output signal is re‐radiated and can cause interference to adjacent band
users. This power reduction is to be by means of input power or gain reduction and not by an
attenuator at the output of the device.
Note: To comply with Maximum Permissible Exposure (MPE) requirements, the maximum
composite output from the antenna cannot exceed 1000 Watts ERP (LTE, Cellular and SMR), the
antenna cannot exceed 1640 Watts EIRP (PCS and AWS), and the antenna must be permanently
installed in a fixed location that provides at least 6 meters (20 feet) of separation from all persons.

: This will be installed in a restricted access location. This equipment complies with Type

4, per UL and CUL 50, Standard for Enclosures for Electrical Equipment. This equipment provides
the degree of protection specified by IP66 as defined in IEC Publication 529.

: This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This product

conforms to all applicable standards of 21 CFR Part 1040.
Caution: Modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
EU Harmonized Standards: Meets essential requirements of R&TTE 1999/5/EC.

Article 3.1a—The protection of the health and the safety of the user and any other person,
including the objectives with respect to safety requirements contained in Directive
2006/95/EC, but with no voltage limit applying.

Article 3.1b—The protection requirements with respect to electromagnetic compatibility
contained in Directive 2004/108/EC.

Article 3.2—In addition, radio equipment shall be so constructed that it effectively uses
the spectrum allocated to terrestrial/space radio communication and orbital resources so
as to avoid harmful interference.

EMC Standards: EN 55022 and EN55024 (CE marked)
Safety Standards: This equipment complies with IEC 60950‐1, 2ND Edition + Amendment 1 (CE
marked) and with UL 60950‐1, 2ND Edition + Amendment 1 (File number E174166) (USA and
Canada)