Buffalo 09101938-0 Manual De Usuario
WCR-G300 / WCR-HP-G300 User Manual
20
Chapter 3 Installation
WDS Setup (Manual)
To configure the WDS manually, follow the procedure below.
1
Change your computer’s IP to a fixed address. For details, please refer to Appendix D (page 102).
ex) IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
blank
Preferred DNS server blank
Alternate DNS server blank
2
Turn off your computer.
3
Connect your computer to one of the AirStation’s LAN ports with the Ethenet cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
Turn on the AirStation, wait one minute, and then turn on your computer.
4
Wait for about a minute, until the AirStation’s LEDs are lit as described below:
Power
Green light is on
Wireless
Green light is on
Router
Green light is on
Diag
Off
※ Refer to page 8 and 10 for LED locations and other details.