Buffalo 000000024 Manual De Usuario
19
Other Tips
Issue:
I reset my AirStation to factory default settings and forgot how to log in to Settings.
Answer:
Open your browser, enter 192.168.13.1 as the browser address, and hit the enter key. You will be prompted to log in.
Enter “admin” for the username and “password” for the password. Click OK to log in.
Issue:
How do I enable or modify security encryption settings on the AirStation?
Answer:
Log in to Settings and navigate to Setup Wizard - Wireless 2.4 GHz Security Settings or Setup Wizard - Wireless 5 GHz
Security Settings. Buffalo recommends using WPA2-PSK AES for wireless encryption. The passphrase or key should be at
least 8 characters in length.
Issue:
How do I change my AirStation’s SSID?
Answer:
Log in to Settings and navigate to Setup Wizard - Set an SSID. Enter a new name for your network and click Next. Once the
AirStation has rebooted, you will need to reconnect any wireless clients to the AirStation using the new network name.
The encryption key will still be the same.
Issue:
Though I am able to successfully make a connection with my AirStation, I am unable to access the Internet with my web
browser.
Answer:
First, confirm that the Ethernet cable is correctly connected to the Internet port. If there is no problem with the Ethernet
cable, reboot the AirStation. If you still cannot access the Internet, check the settings of the router that the AirStation is
connected to. If you are using the AirStation in a hotel, call hotel staff to check the connection.
Issue:
Where can I download the latest drivers, firmware, and instructions for my Buffalo wireless products?
Answer:
The latest drivers and firmware are available online at www.buffalotech.com.
I reset my AirStation to factory default settings and forgot how to log in to Settings.
Answer:
Open your browser, enter 192.168.13.1 as the browser address, and hit the enter key. You will be prompted to log in.
Enter “admin” for the username and “password” for the password. Click OK to log in.
Issue:
How do I enable or modify security encryption settings on the AirStation?
Answer:
Log in to Settings and navigate to Setup Wizard - Wireless 2.4 GHz Security Settings or Setup Wizard - Wireless 5 GHz
Security Settings. Buffalo recommends using WPA2-PSK AES for wireless encryption. The passphrase or key should be at
least 8 characters in length.
Issue:
How do I change my AirStation’s SSID?
Answer:
Log in to Settings and navigate to Setup Wizard - Set an SSID. Enter a new name for your network and click Next. Once the
AirStation has rebooted, you will need to reconnect any wireless clients to the AirStation using the new network name.
The encryption key will still be the same.
Issue:
Though I am able to successfully make a connection with my AirStation, I am unable to access the Internet with my web
browser.
Answer:
First, confirm that the Ethernet cable is correctly connected to the Internet port. If there is no problem with the Ethernet
cable, reboot the AirStation. If you still cannot access the Internet, check the settings of the router that the AirStation is
connected to. If you are using the AirStation in a hotel, call hotel staff to check the connection.
Issue:
Where can I download the latest drivers, firmware, and instructions for my Buffalo wireless products?
Answer:
The latest drivers and firmware are available online at www.buffalotech.com.